Axflow
About us
The leading source of pumps, mixers, valves, heat exchangers, instrumentation, and fully engineered fluid-handling systems for the chemical industry.
Delivering corrosion-resistant solutions, precise process control, and proven application expertise to support safe, reliable, and efficient chemical production across continuous and batch operations.
Products & services
Argal Basis
BASIS pumps are single stage, and magnetic driven centrifugalpumps. The range includes 5 models with capacities between 15 and 70 l/min. The volute casing is realised with Polypropylene reinforcedwith fiberglass, by a monolithic injection in themould and with an encapsulated front shaft bearing.The connections can be hosed or screwed. • The rear casing is obtained through the same processand hosts the rear shaft bearing. • The coupled volute and rear casing are realised to beleakage proof. • The impeller is made of Polypropylene reinforced with GFR.COMPONENTSTMB Mode
Argal Route
ROUTE pumps are available in magnetic driven and mechanical seal versions for pumping a diverse range of chemicals with impurities and suspended solids. A patented system for dry running without damage is available for the magnetic driven “T” version. ARGAL’s ex-proof configuration made of PP or E-CTFE + carbon fiber makes ROUTE pumps ideal for operating in explosive atmospheres. The pumps can also be fitted with a stainless steel casing harness to improve their physical robustness. Strong magnetic coupling made of rare-earth materials(Neodimium Iron Boron) and “N” (standard), “P”(powered) or “S” (strongly powered) versions allow topump liquids with 1.05 - 1.35 - 1.8 specific grativy respectively.
Gruppo Aturia - KSMKM API 610 Pumps
A range of split case between bearing process pumps to API 610 (BB2). KSMKM pumps can be constructed as two stage units. Also available as mag drive API 685.
Blackmer Magnes
Sliding Vane Magnetic Drive Pumps
Wilden Clamped Metal Pumps
Wilden’s Original Series AODD pumps are designed for utilitarian applications that require a robust construction. They utilise ProFlo which automatically optimizes air consumption and eliminates overcharging of the air chamber.
Wilden Clamped Plastic Pump
Wilden’s Original Series AODD pumps are designed for utilitarian applications that require a robust construction. They utilise ProFlo Shift which automatically optimizes air consumption and eliminates overcharging of the air chamber.
Almatec Modular Metal Series
Flows up to 333 l/min & Pressure Up To 7 bar.
Pulsa Metering Pumps
Pulsa Series are high specification metering pumps available with three different diaphragms designs: Flat with dish plates to prevent over deflection, Hydratube for high viscosity liquids and Hydracone for self priming applications.
Almatec ATEX Plastic Pumps
E Series pumps are plastic ATEX rated AODDs for flows up to 24 m3/hr and 7 bar
Gruppo Aturia ELV
Vertical axial flow pumps to API 610 (VS3) made from thick castings and available as both single and two stage units. Single stage units can pump up to 8 m head. ELV pumps have been in service in numerous different applications around the world for many decades.
Gruppo Aturia PTM
Mag drive turbine pumps in PP and PVDF for flows up to 15 m3/hr and heads of 55m
Wilden Bolted Plastic
A variety of elastomer options including Teflon® PTFE are available to meet abrasion, temperature, and chemical compatibility concerns. The Advanced™ Series plastic pumps are offered in polypropylene, PVDF and Teflon® PFA. A variety of options such as ANSI and DIN flanges and specialized air distribution systems are available to meet your specific application requirements.
Realax IP Series
A suite of industrial hose pumps that utilise shoes to compress the hose rather than rollers giving a more even and longer sealing area. They are fitted with inverter driven motors and have sturdy reinforced hoses.
Realax ISI Series
A suite of industrial hose pumps that utilise shoes to compress the hose rather than rollers giving a more even and longer sealing area. They are fitted with inverter driven motors and have sturdy reinforced hoses.
Realax RP Series
A suite of industrial hose pumps that utilise shoes to compress the hose rather than rollers giving a more even and longer sealing area. They are fitted with inverter driven motors and have sturdy reinforced hoses.
Realax APY Series
APY tube pumps are ideal for lower pressures and low flow applications providing accurate dosing of small quantities of up to 90 l/h and up to 2 bar pressure. The three roller design cuts vibration and tube replacement is quick and easy.
Wilden Stallion
The Wilden Stallion pump series excels in managing tough slurry applications due to its rugged construction and large internal clearances, preventing clogging from large particles. With a maximum flow rate of 764 l/min and a pressure capacity of 8.6 bar, it is ideal for handling abrasive and viscous materials. Constructed for portability, it features carry handles and a robust frame suitable for challenging environments. The pump's ability to operate under extreme conditions, including submersion, dry runs, and freezing temperatures, makes it versatile and reliable. This series also offers customizable elastomers, including EPDM, FKM, and Buna, ensuring compatibility with a wide variety of fluids and operational needs. Backed by ATEX certification, it is a trusted solution for safe use in hazardous areas.
Wilden Brahma
The Wilden Brahma Series pumps are specifically designed to transfer solid-laden slurries safely and effectively. With a unique top inlet and bottom discharge design, these pumps minimize the risk of damage caused by product entrapment or settling solids. Engineered with flap valves instead of traditional valve balls, the Brahma Series excels in handling large-size solids up to 76 mm. This design ensures seamless operation, even in challenging industrial and wastewater environments where reliability is paramount. Constructed from durable materials like cast iron and aluminum, these pumps are highly resistant to wear and tear. They support a broad range of operating conditions, including extreme temperatures and viscosities, making them an excellent choice for demanding applications.
Wilden Velocity
The Velocity Series pumps feature a groundbreaking design that allows the mounting position to be adjusted quickly and easily by loosening a single screw. This innovation ensures unparalleled flexibility for OEM systems and installations in tight spaces. Engineered for performance, these pumps provide enhanced suction capability compared to previous models. With an interchangeable mounting plate, they integrate seamlessly into setups with footprints matching select competitors and earlier Wilden models. Equipped with a smart air valve featuring just two moving parts, the Velocity Series reduces the risk of operational downtime. Its durable construction and versatile material options make it an ideal choice for a wide range of applications.
Boyser LB-M Series
Elastomer coated rotary lobe pumps for flows up to 130 m3/h
Boyser LB-S Series
Elastomer coated rotary lobe pumps for flows up to 45 m3/hr
Pulsafeeder Eco GearChem
External gear pumps available in various materials and designed for the handling of low and high viscosity liquids – even in continuous or cyclic operations. ECO Gearchem pumps offering a broad range of pumping solutions for applications in chemical transfer – even in continuous or cyclic operations. ECO Gearchem pumps are available in austenitic stainless steels - 316 and Alloy 20 - and high-nickel Alloy C for housings and also non-metallic materials like glass-filled PTFE, carbon graphite or PEEK (polyetheretherketone) for the spur gears.
Wernert NKPF Vertical Centirfugal Pumps
Seal-less side tank mounted vertical plastic lined pumps for aggressive and solid laden liquids. NKPF pumps offer the same stability as a metal pump due to the outer metallic construction. Having no bearing or shaft seal makes them suitable for liquids with a high suspended solids content.
Gruppo Aturia - SMKM-M
A range of single stage overhung process pumps to API 610 (OH2). Thrust is balanced by means of holes and wear rings in the back side of the impeller, residual thrust is absorbed by a double angular contact ball bearing selected for safe operation up to 100,000 hours. Also available as mag drive API 685.
Gruppo Aturia - TK
A comprehensive range of horizontal multistage boiler feed pumps designed to ISO 9908 and ISO 9906 deg 2. All models can conform to the latest ErP directive requirements.