IKA England Ltd
About us
IKA is your reliable partner in laboratory, analysis and process technology. When it comes to applications in the areas of stirring, mixing, tempering , distilling or grinding, market leaders rely on our proven products and technology. We are continually working to further develop our portfolio according to the needs of our customers. Building on this, we network our products and services to create holistic, application-oriented solutions and enable our customers to achieve the best possible results and step into the digital age.
Products & services
TURBOTRON
The TURBOTRON® agitators are classic economic machines designed to handle a variety of different stirring tasks. The TURBOTRON® agitators are most commonly used for: acceleration of dissolving processes, temperature transfer within a medium, or simple mixing of powders with a liquid phase. TURBOTRON® agitators are used in combination with a variety of drives, seal systems and tools to accommodate a broad spectrum of tasks and operating conditions. While manufacturing custom agitators, IKA engineers determine the optimum dimensions, installation positions and customer-specific requirements. IKA produces agitators to work in a variety of situations: in open or closed vessels, with volumes from 100 to 20.000 litres, and with products having diverse characteristics and viscosities. The RK and RKG series are designed to be used with either open or closed pressure-less vessels. The agitators with shafts are mounted directly on the drive motor (RK) or the geared motor (RKG). The agitator shaft is supported by an additional bearing in the flange. PTFE graphite material is used to seal the bearing, which provides excellent running properties and maximum resistance. The RF and RFG models are designed for use with closed and pressure vessels (standard 2,5 bar) and are equipped with a massive lantern; optionally also for full vacuum and/or pressures up to 10 bar. The agitator shaft is mounted separately and can be equipped with a shaft coupling. Two seals are available for these models: special radial shaft sealing rings made from a PTFE compound or a double-acting mechanical seal. TURBOTRON® machines can be equipped with a high-speed propeller, axial turbine, stirring disk, toothed disk, beaker stirrer, slow-running anchor, skew blade or spiral stirrer with a high torque.
TURBOTRON® RKG-00-Bo ATEX
The IKA TURBOTRON® RKG-00-Bo ATEX is a powerful, mechanically controlled agitator with an ex-protected design for laboratories, pilot plants and small-scale production. It is designed for use in open or pressureless vessels for the processing of free-flowing mixtures in the lower or medium viscosity range. Optionally, it can be equipped with exchangeable tools such as propeller, turbine, dissolver, centrifugal, paddle or anchor stirrers. All parts that come in contact with the mixture are made of high-quality 316L stainless steel (DIN 1.4404). Protection against risk of injury due to the rotating shaft is optionally available. The RKG-00-Bo ATEX machines are an explosion-proof alternative to IKA lab and pilot machines RW 28 digital and RW 47 digital. The IKA TURBOTRON® RKG-00-Bo agitators, which are delivered to customers from EU countries, are, naturally, permitted for use in the Ex-area 1 (2G), temperature class T3 according to ATEX 95.
Agitators
IKA agitators are ideal for acceleration of solution processes and syntheses, temperature exchanges within a medium as well as the mixing of easily mixable liquids and solids. The agitator's primary application is the processing of flowable mixtures in a low to medium viscosity range. Agitators can be optionally equipped with a fast propeller, an axial turbine, a stirring disk, a toothed disk, an IBC cup stirrer, or a slow and powerful anchor stirrer. The IKA ROTOTRON® jet stream agitator stands out due to an extremely strong axial conveying effect. Even when it comes to less-than-optimal vessel dimensions and shapes, the jet stream agitator ensures a very intensive recirculation of the mixture while using relatively low energy input. All metal parts of the IKA agitators, which come in contact with the product, are made out of high-quality stainless steel. IKA agitators are available in several different sizes and designs according to the GMP and/or ATEX guidelines. Furthermore, on customer's request they can also be delivered with matching stands and fastening accessories.
Inline dispersers / mills
IKA represents the development of continuous mixing processes. Advantages of IKA inline machines include improved product quality and better stability in fewer passes, at a lower cost to you. In IKA inline machines, the dispersion occurs in the mixing chamber, which is reduced to the smallest volume. Thus, the mixing energy is introduced into the product in the most efficient way. Additionally, with the IKA inline machines, the product flow is directed through the specially developed rotor-stator tools. This results in a consistently reproducible particle size with a narrow distribution. IKA inline machines offer numerous advanced mixing solutions for the production of coarse and fine emulsions, as well as for suspensions, wet milling, and homogenization. IKA's product range includes several types of inline machines for various mixing technologies. Most types of machines are available in 8 different sizes and are suitable for both small scale laboratory samples and large scale production applications. All IKA inline mixers are driven via a belt drive system to maintain a constant tip speed for every machine in a series, thus ensuring scalability. The smaller scale IKA inline machines, magic LAB®, LABOR-PILOT and PROCESS-PILOT, are specifically developed for laboratory and pilot plant work. These machines are characterized by a unique design with a drive unit, seven interchangeable modules and additional accessories available for continuous as well as batch mixing processes or for recirculation type systems.
Standard Plant SPP
The approved "Standard Production Plant" (SPP) is the IKA solution for the production of emulsions and suspensions in many areas of application. Depending on its execution, the Standard Production Plant can be used for cosmetic creams and lotions, for mayonnaise or dressings in the food industry as well as for suspensions and emulsions in the chemical industry or for production of paints and lacquers. The SPP is an innovative and highly advanced, but cost effective mixing plant used for all standard process operations like mixing, stirring, homogenizing and dispersing. Due to its simple design, it allows easy operation and guarantees a constant mixing quality. Options like vacuum degassing, double jacket for heating or cooling and ports for the additive incorporation and sampling makes the SPP an ideal machine for the complete product manufacturing sequence.
magic PLANT
The IKA magic PLANT is a laboratory scale process plant for batch wise mixing and emulsifying of low viscous masses up to masses just about capable of flowing. The magic PLANT can be used for a great variety of applications. It is especially suited for processing of products from the cosmetics, food and pharmaceutical industries. The main advantages of the magic PLANT are its modular design, the integration of several functions with the magic LAB or the ULTRA-TURRAX UTC T25 and the standardizing of components. It can be delivered in the following three configurations: Magic PLANT Basic, magic PLANT inline, magic PLANT powder
The new generation of EUROSTAR overhead stirrers
The new generation of EUROSTAR overhead stirrers combines modern design, user-friendliness and reliable performance. With up to 23% less space required compared to the previous models they fit perfectly into any laboratory. EUROSTAR 100 control is a universal laboratory stirrer and the right solution for advanced mixing tasks up to 100 liters (H2O) and viscosities up to 70 000 mPas. Its maximum torque of 100 Ncm and linear adjustment to 60 Ncm at maximum speed guarantee reliable and powerful performance. EUROSTAR 20 digital is the right solution for simple mixing tasks up to 25 liters (H2O) and viscosities up to 10 000 mPas. Its maximum torque of 40 Ncm at low speeds and linear adjustment to 20 Ncm at maximum speed guarantee reliable and powerful performance. EUROSTAR 40 digital is the right solution for simple mixing tasks up to 25 liters (H2O) and viscosities up to 30 000 mPas. Its maximum torque of 60 Ncm at low speeds and linear adjustment to 40 Ncm at maximum speed guarantee reliable and powerful performance. EUROSTAR 60 digital is the right solution for simple mixing tasks up to 60 liters (H2O) and viscosities up to 50 000 mPas. Its maximum torque of 100 Ncm at low speeds and linear adjustment to 60 Ncm at maximum speed guarantee reliable and powerful performance. EUROSTAR 60 control is a universal laboratory stirrer and the right solution for advanced mixing tasks up to 60 liters (H2O) and viscosities up to 50 000 mPas. Its maximum torque of 100 Ncm and linear adjustment to 60 Ncm at maximum speed guarantee reliable and powerful performance. EUROSTAR 100 digital is the right solution for simple mixing tasks up to 100 liters (H2O) and viscosities up to 70 000 mPas. Its maximum torque of 100 Ncm at 1300rpm and linear adjustment to 60 Ncm at maximum speed guarantee reliable and powerful performance.
EUROSTAR 60 control - NEW
The new generation of EUROSTAR overhead stirrers combines modern design, user-friendliness and reliable performance. With up to 23% less space required compared to the previous models they fit perfectly into any laboratory. EUROSTAR 60 control is a universal laboratory stirrer and the right solution for advanced mixing tasks up to 60 liters (H2O) and viscosities up to 50 000 mPas. Its maximum torque of 100 Ncm and linear adjustment to 60 Ncm at maximum speed guarantee reliable and powerful performance. The EUROSTAR control models come with various advanced features, such as integrated temperature measurement, reversible direction of rotation (left/right), interval mode and an integrated vibration sensor. Highest precision thanks to new viscosity measurement An integrated torque sensor offers high precision torque monitoring (+/- 1 Ncm accuracy). The torque measurement data can be used to calculate viscosity (mPas) based on user selected stirrer and vessel criteria providing important feedback on the mixing process. The desired stirring speed 30-2000rpm is always guaranteed even with changes to the torque demand or viscosity of the material. ISO Class 7/8 Cleanroom Compliance allows for use in cleanroom environments in pharmaceutical, biotech, medical device, electronics, and aerospace labs, industries where particle control is critical. Maximum safety and reliability • User-friendly: Large TFT display shows all parameters at a glance • Quick Sense Keyless Chuck: allows the mixing tools to be changed with one hand, without additional tools • Lock key: Prevents accidental changes to settings • Safety Circuits: automatic safety shutoff from stirring impeller blockage or user specified torque limit • Protection class IP 54: Resistant to splash water and steam for reliable use in demanding environments • Brushless motor: Durable, clean and quiet in operation
RCT BASIC - NEW
The new Benchmark for Laboratory Safety and Efficiency The new RCT basic magnetic stirrer sets a benchmark as the smallest unit with 800 W heating power, combining maximum safety, robustness, efficiency, and intuitive operation. Compact, durable design With IP54 protection and a die‑cast aluminum housing, it resists liquids, aggressive vapors, and mechanical impact—ideal for continuous use in harsh lab environments. Its compact footprint (160 × 200 × 100 mm) saves fume‑hood space and supports flexible, parallel setups. Made in Germany Produced in a fully automated German facility, the RCT guarantees top quality, reliability, and long service life. Improved heating plate & functions An optional anodized heating plate offers scratch and chemical resistance while ensuring
Mills
Laboratory Mills, Grinders & Crushers Crush soft, hard or fibrous material with an IKA grinder mill. Batch grind brittle or hard, dry items with laboratory mills, like our M 20 Universal mill. Our laboratory grinding mills feature variable speed control, enabling precise: - Grinding fineness levels - Course size selection - Powder-level milling - Consistent testing - Industrial and scientific applications
Thermoshakers
Thermoshakers Our MATRIX thermo shaker combines mixing, heating, and cooling into one reliable device. Even small sample quantities achieve consistent results for use in laboratories that focus on: Biologicals Pharmaceuticals Biochemicals For example, our thermoshakers work well even with the smallest quantities, such as PCR, deep well plates, and reaction vessels. The MATRIX family of products offers complete mixing capabilities without cross-contamination. Sensitive applications, like those using blood samples, ELISA assays, and DNA/RNA applications, are some of the areas where our thermoshakers excel. Intuitive operation allows for variable inserts and different vessel types, with precision temperature control. MATRIX offers the flexibility labs need for small and large sample sizing with unmatched reliability. Whether your application requires rapid mixing or gentle tampering, these all-in-one thermo shaker models eliminate the need for multiple devices. When reproducible results matter, choose MATRIX thermoshakers.
Shakers
IKA offers the perfect lab shaker for mixing and shaking tasks. In addition to the tried and tested orbital shakers and horizontal shakers, the innovative incubator shaker KS 4000 is gaining popularity in laboratories. Its precise temperature control makes the incubator shaker a reliable asset in every lab. IKA products boast speeds of up to 3,000 revolutions per minute during continuous operations. A digital display, timer function, and controlling options via the lab software Labworldsoft ensure optimal working conditions. Integrated end point positioning allows for automated sampling. An extensive array of attachments enables the use of vessels in every shape and size. Functionality, safety, and longevity are the main goals in the development of IKA lab shakers.
Laboratory Software
It's the cockpit for your digital laboratory labworldsoft® 6 laboratory software networks, controls, and evaluates: Over 700 laboratory instruments, mini-plant systems, and technical items from more than 55 manufacturers are pre-installed in your new laboratory cockpit. We would be more than happy to implement your desired device in the equipment library if it isn't already there. labworldsoft® 6 lets you digitize your laboratory. All the equipment can be operated right from your PC: You can specify dependencies between processes, automate routine tasks, define measured value representation and real-time calculations.
Vacuum
IKA’s small but excellent product group of vacuum pumps is perfectly suitable for many dry and oil-free applications in the laboratory. The devices stand out due to their high suction capacity and ease of service. Their membranes are particularly chemical resistant, as well. The diaphragm vacuum pumps are suitable for many vacuum tasks in the lab such as separation, filtration or degassing. They are even suitable to construct a laboratory vacuum system in which you can switch any number of vacuum controllers in series according to the application. In addition, they perfectly complement your rotary evaporators or laboratory reactors.
Synthesis Reactors
IDEAL FOR ORGANIC AND AQUEOUS SYNTHESES EasySyn is the reactor system for organic or aqueous syntheses. And the only reactor system for which you can get all the complementary components from a single source: Overhead stirrers, circulators, vacuum pumps and controllers, sensors and automation software. All from IKA and all perfectly matched to each other. With its double-walled reactor vessels from 100 ml to 5000 ml, EasySyn is a medium-sized and very flexible upscaling system. It ensures safe and reproducible chemical reactions.
Rotary Evaporators
Distillation has never been more easy and intelligent Distillation is one of the most critical functions in the laboratory. Irrespective of whether an experiment is conducted for academic, pharma, chemical, or other industries, distillation is central to most applications. For a successful distillation, the laboratory requires an effective rotary evaporator with modular design and highest precision at best.
Viscometer
Viscometers The ROTAVISC viscometer series determines the viscosity of liquids in all areas of application ranging from the laboratory to quality control. The four devices measure in different viscosity ranges. Regardless of a simple or demanding viscosity measurement – the ROTAVISC viscometer delivers rapid and accurate results.
Temperature Control
Temperature Control IKA offers a wide range of high-precision temperature control systems according to DIN 12876 for temperature ranges of -20°C to 250°C. The product portfolio includes immersion circulators, heating bath circulators and recirculating chillers. Precise technology and user-friendly design make temperature control easy for any application. All IKA temperature control instruments meet the highest standards in terms of safety, power and intelligence. In addition, IKA provides a wide range of accessories for its temperature control systems such as baths, bridges, thermal fluids and much more.
Dispersers
Proven and precise technology for homogenizing The IKA range of dispersers are used for volumes ranging from 0.5 to 50,000 ml (H2O) and come equipped with a digital display. These homogenizers offer a wide speed range up to 30,000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. The high performance drive ensures immense speed stability. Due to their broad spectrum of dispersing tools, IKA dispersers are highly effective for a variety of uses.
Overhead Stirrers
POWER, PRECISION AND VERSATILITY FOR ALL MIXING NEEDS Overhead mixing utilizes a motor-driven shaft with an impeller or blade immersed in the material to be mixed. Mounted above the mixing vessel, this setup provides perfect flexibility for handling a wide range of viscosities from liquid to high-viscous samples and different volumes. From gentle stirring to high-intensity mixing, overhead stirrers excel across laboratory and industrial applications. The IKA overhead stirrers of the EUROSTAR and RW series play an important role in various industries, offering efficient, reliable and versatile solutions for mixing, blending, homogenizing and processing materials.
Magnetic Stirrers
IKA magnetic stirrers deliver 25% greater energy efficiency while providing the robust features laboratories depend on. Known for reliability and safety, our portfolio includes magnetic stir plates for both open and closed vessels, covering applications from micro-scale to high-volume. Non-heating and heating magnetic stirrers are available along with contact thermometers for precision temperature control for heat-sensitive applications. Our catalog includes magnetic stirrers such as: - Package stirrers for starter applications - Digital stirrers for greater programming and monitoring - MIXSTER magnetic lab stirrer models and sets for multi-position (up to 30 positions) with a chemical-resistant glass surface. Our stirrers fit seamlessly into your lab setup while ensuring precise control for complex mixtures.
Electrochemistry Kit
In a unique endeavor, IKA owner René Stiegelmann has partnered up with Professor Phil S. Baran of the world-renowned Scripps Research Institute in La Jolla, California (USA). Over the past three years, engineers and chemists have worked hand in hand to develop a product combining two divisions of chemistry communities: the Electrochemical and the mainstream Synthetic Organic Chemistry Communities that traditionally don’t have much in common. ElectraSyn 2.0 combines three products in one and will facilitate the mass adoption of electrochemistry for preparative organic synthesis: a potentiostat, an analytical device and a stir plate.
