The new FBM 4100 battery pump motor integrates our high efficiency 36 V brushless motor with dry run detection and programmable batch dispense control—protected by your choice of IP 24 or IP 44 housings. Powered by high performance Einhell batteries, the FBM 4100 delivers the power of a mains powered motor with true cordless freedom, moving drum pump power, convenience and functionality to a new level. Weighing just 2.8 kg including batteries, it provides fast, clean and controlled transfer of a wide range of liquids—from chemicals and additives to oils, food ingredients and corrosive media. The intuitive LCD interface provides speed selection in 10% increments and six memory slots for repeatable filling, making precise dispensing effortless. With compatibility across FLUX F 400 and F 570 pump series—and optional adapters for other manufacturers pumps—the FBM 4100 instantly upgrades both new and existing drum and IBC pumps. Empty up to eleven 200 litre drums on a single charge, while rugged battery covers and durable construction ensure reliable operation in tough environments. The Pro version adds a 5 pin interface for connection of external start/stop and 24 V accessory supply, delivering seamless integration with flowmeters, level sensors and automation accessories. Smart. Independent. Powerful.

The One-Stop Solution for Sustainable and Compliant Waste Management, the 1st Waste Customer Portal provides businesses complete control and complete visibility over their entire waste management operation. This includes: - Site-level service performance – reported at both site and group level - Missed lifts and service issues - Recycling and sustainability metrics - Carbon reduction and avoidance metrics - Cost tracking by site and group - Digital access to all compliance documents and invoices

Fully interactive, and video, animation and scenario led, this Dangerous Goods Awareness eLearning course delivers a clear introduction to dangerous goods for those in the chemical industry. It covers dangerous goods transported by air, road, and sea. At the end of the training, delegates will understand what dangerous goods are, the key regulations (ADR, IMDG, and IATA) and the nine dangerous goods classes and their risks.

The most usable and sustainable dosing solution on the market DDA SMART Digital Dosing brings next-level operator safety and ease of use while keeping the accuracy for which it is renowned, offering next-generation simplicity and precision. We designed the next-generation DDA to help industries, building owners and utilities build a more sustainable future. Built to last, we’ve increased options for repair and service, and the design enables the extension of the pump’s life. See how improved user experience, time-saving transfer of pump settings, enhanced connectivity, comprehensive monitoring, and easy service and maintenance ensures smooth and continuous dosing.

Density meter measurements are highly sensitive to temperature and simply correcting for temperature alone does not work well for many sample types. The DDM 29 hand held density meter has unmatched capabilities in a fully portable unit. The problem with most hand held density meters is they drift because they do not control temperature. Most use temperature correction with 2 or 3 digit accuracy which is very prone to drift. Density meter measurements are highly sensitive to temperature and mathematically correcting for temperature may not be good enough for some applications. Only temperature control will result in the accuracy many users require. Peltier Control The DDM 29 features Peltier temperature control, not present in most hand held density meters. It uses powerful and compact Peltier technology to control the sample temperature for precise heating and cooling, ensuring stable and accurate measurements to 4 decimal places at either 20° or 25°C.

All of our services are available on an ongoing or one-off basis. We act as a DGSA on Demand for several customers where they keep our contact information on record and only use us for support when they need it.

Introductory 5-Day DGSA Qualification Course Offer — Only £995 Includes the brand-new ADR 2025 book (Save over £500 compared to standard pricing) This launch price is strictly limited to the first 20 bookings — once they’re gone, the course returns to standard rates. If you’ve been considering DGSA certification, this is the moment to do it. Strengthen your organisation’s compliance capability with structured, practical DGSA training. This comprehensive learning programme equips you with the knowledge and confidence to take responsibility for the safe, secure and legally compliant transport of dangerous goods by road. Packed with industry insights, hands-on tasks and targeted exam preparation, this course provides everything you need to succeed in the DGSA public examination — and excel in the role thereafter. Special offer still available with limited places.

PROTEGO® Diaphragm Valves function as pressure vacuum relief valves. The flexible diaphragm allows them to work as a dynamic flame arrester which provides endurance burning protection. For additional safety, these devices are equipped with a static flame arrester unit. For extreme cold weather conditions A specially designed valve seat, combined with the flexible diaphragm, prevents the diaphragm from freezing on the valve seat. For problematic products The only vent which works reliably with problem products such as Styrene or Acrylates.

The New Dosatron Industry Line D6IL – high precision additive dosing pump for industrial applications such as Metal Working, Industrial Washing and Car Wash. It offers precise and homogeneous proportional dosing at water flow rates up to 6m³/hr. Extremely easy to "plug & play" and featuring a simplified piston, leading to easier maintenance & increased reliability.

Electric operation without compressed air – ideal for flexible and mobile applications Plug & Play – easy installation without the need for a qualified electrician Two operating modes: single impact and continuous impact Environmentally friendly – suitable for renewable energy use, sound-damped version available Process integration – controllable via RS-485 with internal impact monitoring

From hazardous areas to the cloud: with ranges of up to 1000 meters and transmission speeds of 10 Mbit/s, Ethernet-APL is paving the way for the Internet of Things in process automation. Existing installations can be used and existing plants can be modernized at low cost. Decades of experience make us a competent partner as you prepare for Industry 4.0. The Ethernet-APL rail field switch is the first switch with Ethernet-APL. It allows users in process plants to deploy Ethernet beyond the control room throughout the plant for the first time. The field switch provides seamless, transparent and simultaneous access to field instrumentation. It enables entirely new applications and therefore new work processes for how users work with instrumentation and all other devices installed in the field of process plants. This brings digital communication via two-wire Ethernet into the field of process plants and allows for easy implementation of IIoT applications into process automation applications. All parties involved, from the planner to the user to the maintenance personnel, are therefore able to reduce risks and increase safety, quality and yield. The fastest and most efficient way to continuously communicate large amounts of data from hazardous areas to the cloud *Cable length of up to 1,000 m and a transfer rate of 10 Mbit/s *Two-wire cable: Data and power are transmitted simultaneously along the same cable *Common physical layer for all devices that provides barrier-free communication between the office and the field *Access to valuable field device data anytime, anywhere enhances transparency and control *Enables analytics based on previously unavailable data for improved plant performance and availability *Easy migration and simple, cost-effective plant modernization with automatic detection of fieldbus communication

Flo-Tel is a practical, reusable burst detection solution for indicating when a rupture disc has activated. Operating on a simple reed switch and magnet technology, the Flo-Tel burst sensor fits into a holder with a magnet on the rupture disc. When the rupture disc bursts, the magnet arcs away from the sensor, giving an open circuit signal. Flo-Tel is non-invasive to the process and is therefore unaffected by downstream pressure fluctuations or corrosion. This feature also eliminates leak paths and the risk of false alarms associated with traditional membrane-type burst detection systems. After rupturing, the disc is the only element that needs replacing, which eliminates the need for expensive re-wiring costs and maintenance planning. Available with a 2m, 5m or 10m cable, Flo-Tel is Suitable for process temperatures up to 300°C and offers a fail-safe detection system. Flo-Tel is ATEX approved to II 1G Ex ia IIC Ga and II 1D Ex ia IIIC Da IP66. It carries the EC-Type Examination Certificate ITS03 ATEX 21698X. Please note that it must be connected to an intrinsically safe supply.

All-in-one Flow pressure and Turbidity Measurement Device with secure electronic data collection and cloud storage. The Flowmaster 250DL MK2 Turbidity Flow Meter provides the most reliable and accurate flow, turbidity and pressure measurements. Ideal for producing verifiable and traceable data for your reports. Measures flow rates to 50 lps, turbidity to 40 NTU, pressure to 25 bar. No moving parts which in turn means that measurements are not affected by debris in the water stream. Features All in one - Flow, Turbidity and Pressure Measurement Simultaneously Logs Flow, Turbidity and Pressure App to Send Log Files to Cloud Robust, Compact and Portable One-Man Lift device

Fristam FCM Colloid Mixer - High-shear colloid mixer for emulsions and sub-micron particle size The Fristam FCM is a hygienic high-shear colloid mixer designed for the production of fine emulsions, suspensions and dispersions. Using an ultra-high performance rotor-stator system, it reduces particles to sub-micron size, creating smooth, stable and shelf-stable products. The FCM is an efficient alternative to traditional homogenisers, delivering uniform product texture and consistent quality across a wide range of demanding applications. Designed for precision and flexibility: At its core, the FCM applies both mechanical and colloidal forces through a precision rotor-stator gap, enabling controlled particle size reduction and high-quality emulsification. An external adjustment system allows operators to fine-tune shear levels during operation, without stopping the process or changing pipework—ensuring maximum process flexibility and efficiency. Key benefits: • High-shear rotor-stator technology for emulsification and homogenisation • Sub-micron particle size reduction for smooth, stable products • Adjustable shear gap for precise control of texture and consistency • Efficient alternative to homogenisers for many applications • Hygienic CIP design for fast, reliable cleaning without disassembly Typical applications: • Emulsions (mayonnaise, dressings, sauces) • Dairy products and liquid formulations • Suspensions and dispersions • Pharmaceutical, cosmetic and chemical products The Fristam FCM delivers precise, high-shear mixing for consistent emulsions and superior product stability in hygienic processing environments.