ROAR will support both fundamental and translational research, by focussing on protocols and tools to enable rapid execution and analysis of reactions, delivering effective solutions to optimise reaction efficiency, selectivity, and robustness.

Magnetically driven pumps are highly corrosion-resistant, making them suitable for handling corrosive fluids and chemicals such as acids, alkalis and saline solutions. Driven by synchronous magnet configuration, their seal-less, zero vapour loss prevents fluid leakage and the release of volatile, toxic and flammable chemicals. Available with ATEX certification, they offer a safe, reliable, energy-efficient and cost-effective solution. From compact pumps for low-duty applications to larger units for demanding services, our magnetically driven fluid handling solutions cover a wide range of requirements. Key features: • Capacity: duties from 1 m3/h up to 320 m3/h • Maximum pressure 16 bar • Zero vapour loss on hazardous liquids • ATEX certified for flammable liquids • No mechanical seals – reducing the risk of leakage • Motors from 0.12kW to 90kW • Handles up to 2% solids as standard, 30% with the solids handling mag drive • Maximum temperature up to 300°C • RunSafe SiC rotating bushes, axial thrusts and shafts for dry run protection • Close-coupled and long-coupled options • ISO 2858 and sub-ISO compliant Materials of construction: Metallic – stainless steel, Hastelloy C, exotic alloys Non-metallic – a ductile iron casing lined with Polypropylene, PVDF (Polyvinylidene Fluoride), ETFE (Ethylene Tetrafluoroethylene), PFA (PerFluoroAlkoxy) or Conductive PFA Moulded – Polypropylene, PTFE (Polytetrafluoroethylene), ETFE (Ethylene Tetrafluoroethylene) except for the moulded STN 70 which is contained within a ductile iron casing for extra rigidity and strength

Available in various sizes and configurations, mechanically sealed centrifugal pumps are a versatile choice for chemical processing and fluid-handling applications. Used independently or integrated with tanks, filters, or valves, pump selection depends on fluid type and viscosity. Seals protect against contaminants to maintain efficiency and extend service life. Key features: • Capacity: standard pumps up to 500 m3/h • Heads: up to 16 bar • Manufactured in line with ISO 2858/DIN 24256 standards • High hydraulic efficiencies achieved with low NPSH (Net Positive Suction Head) • Options for shaft sealing include packed stuffing box and single or double mechanical seals • Pump casing and seal housing can be equipped with heating or cooling chambers as needed • Units up to 30kW size can be close-coupled to motors with B5 flange using a support lantern • Large variety of impeller options – open or closed • Suitable for contaminated, corrosive or abrasive fluids • Options for high or low viscosity fluids • Suitable for gas-entrained liquids • Low flow/high head pumps available Materials of construction: • Metallic: cast iron, ductile iron, Hastelloy C, stainless steel, super duplex • Non-metallic: lined with PFA (PerFluoroAlkoxy), PVDF (Polyvinylidene Fluoride) or Polypropylene

Dinnissen's Centrifugal Sifters make it possible to sieve large quantities of product quickly and accurately. The centrifugal force in the rotating, cylindrical sieve ensures that the product is evenly sieved.

A camera light combination system is mounted to the centrifuge using the CANTY angled mounting plate, allowing for continuous monitoring from the control room, enabling greater operator control and efficient identification of any process issues.

EMEC controllers offer a solution to a wide variety of measurement and control needs in chemical dosing processes. Our controllers allow accurate, continuous management of dosing processes, as well as alarm management and recording and archiving of readings (with the possibility of exporting via USB). Parameters such as pH, redox (oxidation-reduction), chlorine, bromine, fluorine, chlorine dioxide, hydrogen peroxide, ozone, peracetic acid, turbidity, conductivity, dissolved oxygen or temperature can be measured and adjusted. Some control systems are already designed for certain purposes, such as the CENTURIO TOWER series controllers designed for cooling towers or the CENTURIO POOL designed for swimming pool management. Remote management What sets the most advanced controllers apart is the possibility of connecting (via Ethernet, 3G/4G or WI-FI depending on the configuration) to the online remote management system ERMES, which allows different controllers located in different places to be monitored and adjusted remotely. With the MODBUS serial communication protocol, on the other hand, it is possible to connect EMEC control controllers with other devices (PLCs) connected to the same network via the RS485 interface. CENTURIO controllers feature multi-parameter digital control systems capable of meeting all chemical dosing management needs thanks to their simple interface and high-performance hardware and software. CENTURIO PRO is the uncompromising, complete and versatile solution, equipped with all the main reading parameters and all the most important functions for managing dosing systems.

Our encapsulated seals provide a high performance and low cost sealing solutions for a variety of chemically demanding applications or where regulatory compliance is particularly important. For instance, in the food industry FDA compliance andthe ability to with stand harsh cleaning chemicals is a necessity, something that standard elastomers often cannot support. ‍ The combination of elastomers and encapsulation choice enables our encapsulated seals to achieve a combination of temperature, chemical and cost performance unrivalled by pure elastomeric solutions. The seamless, uniform FEP/PFA encapsulation provides the Chem-Ring® near universal sealing capability. ‍ Supply contracts are available to provide exceptional pricing on high volume demands, with guaranteed stocking and in-time, same-day batch quantity despatch. Special supply agreements maximise your supply chain reliability and minimise supply cost.

The CheMastery Suite is a Software-Hardware Platform enabling: - End-to-End automation, no human intervention - 24/7 operation - Scalable workforce - Reproducibility - Traceability - Manufacture in-house, on-demand - Cost & time efficiency - Predictable project timelines - Scale-up & Process Chemistry - R&D, manufacture & formulation - Upskilling chemists - Improved Health & Safety The platform offers: - Standardisation of protocols - Automated synthesis & purification - Live data collection - R&D & Process Chemistry scale - Design of Experiments - Scaling & Optimisation - Electronic Laboratory Notebook

Generate your SDS automatically in accordance with CLP and GHS regulations quickly and efficiently. Avoid penalties by complying with legislation easily and ensure that your products can be marketed correctly in their destination country. Chemeter® uses a unique and automatic intelligent calculation system, fully adapted to the country where the products are marketed and to the specific regulations of the sector they belong to. By not using static templates, each safety data sheet generated is unique and distinct. By simply introducing the final formula of the product, Chemeter® will automatically classify and calculate the toxicological and ecotoxicological properties, as well as assign workplace exposure limits, national inventories (TSCA, DSL, SVHC, etc.), and everything necessary to issue the safety data sheet, with the option to modify this information should you wish. The results of Chemeter®'s calculation system for physico-chemical properties of mixtures have been validated by a research team made up of specialists and academics, recognised through rigorous quality control. As a result, Chemeter® is a proven and reliable software.

Our Ejectors are used globally in a multitude of chemical dosing applications. Ejectors operate without any moving parts, so are ideal to dose chemicals both safely and efficiently. Where other mechanical dosing pumps may wear and fail, Ejectors offer seamless, reliable performance day in, day out. Our Liquid Jet Pumps are designed to accurately entrain, mix and dilute a secondary liquid, eliminating the need for mechanical dosing pumps and mixers. Depending on your specific application we can manufacture systems to dose liquids, solids and gasses. We also design combination systems for combined dosing and heating. Ejectors can be designed as part of skid packages or installed directly into existing pipework. Chemical dosing ejectors are often supplied alongside our Tank Mixing systems.