Vertical axial flow pumps to API 610 (VS3) made from thick castings and available as both single and two stage units. Single stage units can pump up to 8 m head. ELV pumps have been in service in numerous different applications around the world for many decades.

Mag drive turbine pumps in PP and PVDF for flows up to 15 m3/hr and heads of 55m

Features: • Fully integrated boiler feed water controller o Walchem Intuition 9 • Colour touchscreen display and data logging • Preconfigured firmware to enable up to 4 Pyxis Lab® smart censors: o Dissolved oxygen (DO) – ST-774 o Sulphite (SO32-) – ST-525SS o Fluorescein (FL) – ST-525SS-T o Conductivity (TDS) – ST-724 • Pre-plumbed in full stainless steel ¼” tubing with compression fittings • Integrated digital sample flow meter and manual rotameter • Integrated ST-774 ultralow dissolved oxygen sensor with flow cell • Integrated stainless steel solenoid isolation valve for sample lockout on temperature alarm • 3 integrated ST-007 stainless steel inline tee assemblies for up to 3 more Pyxis sensors • Plug-n-play sensor installation with prewired pigtails for future sensor addition • Integrated sensor calibration and maintenance shelf for user convenience

We provide specialised hazardous waste management through our Tockwith facility, where expert chemists lead the precise identification and safe segregation of complex waste streams. Our triple ISO-certified approach prioritises the waste hierarchy to deliver sustainable, compliant recovery and disposal solutions that safeguard both your business and the environment.

We specialise in providing hazardous waste services including the safe removal, transportation, recycling, recovery, disposal, and secure destruction of various hazardous and problematic wastes, together with our mobile chemist services for the compliant listing and packing of your waste streams to meet your duty of care needs.

The Carrick Backpacks come in 1L, 2.5L and 5L sizes are can be constructed with HDPE or LDPE materials. They are mainly used in the Animal Health Market but can also be used in other sectors such as the Chemical Industry,

Heat circulation thermostats are specially designed for temperature control of externally attached applications with a small volume. The devices are fitted with bath vessels made of stainless steel or transparent polycarbonate and have rear-side pump connections as standard as well as a stainless steel bath cover with a filling opening. All models are fitted with an overtemperature and low level protection system according to safety class III/FL (DIN 12876) for use with flammable fluids. A powerful pressure-suction pump ensures optimal heat transfer to external attached applications.

Heat Trace Ltd offers a comprehensive range of ancillary products designed to support its advanced heat‑tracing systems, ensuring precise regulation and consistent performance across all applications. These include: - Termination methods - Temperature control and monitoring - EXe and EXd solutions Termination Methods: Standard Termination Standard Termination involves the use of conventional plastic or metal cable glands. These glands are specifically made for our heating cables. Cable Glands are normally supplied in termination kits. The kits are available for safe and hazardous areas and contain all the parts required for connection to the power and to terminate the end of the cable. Kits also contain a caution label and cable identification tag. DESTU Termination The DESTU system, for safe and hazardous areas, reduces the risk of damage to the heating cable as it emerges from the thermal insulation for connection into the junction box. DESTU is available for power termination, in-line splice and tee splice terminations. AJB/D Junction Box The AJB/D Junction Box is designed for use with electric trace heating systems and is available for use in both safe and hazardous areas. IP66 rated, with a full range of accessories and termination kits available. EXd Range of Junction Boxes - R Series The 'R' Series range of Junction Boxes offer a quality EXd Solution for use with electric trace heating systems. Temperature Control & Monitoring: Heat Trace supply a range of stand alone and panel-mounted, mechanical and electronic temperature control and monitoring systems, for both safe and hazardous use: - Capillary thermostats - Electronic thermostats

Heatrod manufacture a wide range of heavy industrial immersion heaters for commercial and industrial applications. With our customers facing increasing energy costs we have introduced the option to include our digital temperature controller into many of our heavy industrial immersion products. The image shown is used in de-ionised water for cleaning processes. Example of Applications: - Commercial cylinder heating (Tanks/Vessels) - Industrial Flow Heating (Pipes/Circuits) - Industrial Heating Applications (Extrusion, Tool Heating, etc) Benefits: - Improved Control/Improved Accuracy - Reduced Energy Costs - Increased Control Options (eg. Aux control for pump) At a basic level this gives the accuracy of PID temperature control so limiting overun on temperatures and energy usage. For more advanced users, our digital controllers can be connected to our secure cloud based management system allowing users the ability to carefully monitor and manage the energy usage of our heaters. Monitoring features allow full visibility of live temperatures and energy usage in your applications which, in turn, allows power optimising decisions to be made. Usage patterns and associated energy usage can then be managed by the use of simple daily/weekly load schedules. Heating schedules can also be linked to low cost tariffs based on scheduling and to avoid high cost times such as Triad periods which are introduced for commercial users between the months of November and February. In advanced cases, users will be able to link their Backer IoT controllers to variable tariff information provided by energy generation companies. The controller will then optimise it's heating patterns in order to reach required temperatures whilst using the lowest cost half hourly periods. The Backer IoT controller can be applied to all of our products either by being built into the unit, where space allows, or by incorporating into a linked control/switch panel.

Flow rate ≤100,000 l/h Viscosity ≤ 100,000 cPs Pressure ≤ 24 bars Sanitary and Industrial Pumps Atex Certification Positive displacement helical pump High suction power Reversible Flow Flow rate proportional to speed Constant flow without pulsations High efficiency Pumps available with 1, 2, and 4 stages Materials according to application requirements.

The Hellma 3 in 1 flow cell is ingeniously engineered, compact and more capable than any other cuvette! Crafted from finest quartz, with black quartz masking, and fully fused monolithic construction, the 3 in 1 is physically tough, with high chemical and temperature resistance; it is even autoclavable! Hellma’s quartz cold-casting technology has enabled our engineers to sculpt the head of the cell to include quartz M6 screw threads for a secure flow connection, fused into the same single monolith, the cell is leak proof under pressure to at least 5 bar! Ergonomically designed with 4 apertures creating 2 perpendicular light paths, each with a different path length, it can be rotated in place to change path length with a simple twist, while still connected to the eluent flow, used as a standard transmission cell with variable path length and for orthogonal fluorescence measurements, it even has a locator dot for ease of alignment tracking. Ideal for tablet dissolution analysis – as absorbance increases over time, with a simple 90-degree rotation the path length can be reduced to boost your instrument sensitivity. Perfect for use with a dissolution cuvette array, the variable path length is sensitive enough to test precious, low concentration pharmaceutical analytes!

Enhancing Process Safety and Quality Whether food, pharmaceutical or synthetic, reliable and precise monitoring of a process is essential for compliant production. Exceeding strict, mandatory USA "3-A" hygiene standards, and European EHEDG compliance, the Excalibur HY 25 (3-A) offers safe, compliant production while maintaining the precise and reproducible measurements.

OQEMA’s Home Care delivers a broad range of surfactants, additives, and patented high-performance formulations for everyday cleaning products. Starting from market trends and customer challenges, we provide expert support and technical know-how to create solutions that meet requirements and build lasting partnerships. Our ingredients are found in laundry detergents, dish care, multi-purpose cleaners, toilet care, and car care products. We focus on continual innovation, sustainability, and market insight, ensuring our technologies power some of the world’s most popular cleaning brands. From fresh, breezy laundry to sparkling dishes and effective household cleaners, the OQEMA Home Care range keeps the whole home clean while helping shape a more sustainable future.

Formulations made easy: With our selected raw materials – from proven classics to innovative functional ingredients – we bring variety and inspiration to your product development. Whether for household, industrial or institutional cleaning applications: we combine market trends with your technical requirements to create effective and reliable solutions. Because in HI&I there are no limits – only opportunities. We offer full technical support on formulation guidance, product improvement and new product development. We have R&D laboratories in our U.K. and German entities that have experienced team members able to meet your technical needs and provide hands on support to improve your product offering.

Our HiPod range is a popular service offering containerised waste solutions for a multitude of hazardous waste streams. Our HiPods can be stored both indoors and outdoors, or utilised within the waste production areas, removing double handling, and providing a safe and compliant storage of hazardous waste. In addition, we specialise in the management of packaged wastes ranging in size from lab smalls to drums to IBCs. Our team will always balance the most economic option with environmental regulations, the waste hierarchy and your specific requirements. Ensuring all relevant and applicable hazardous waste regulations are followed, our team can provide specialist technical advice to complex identification, packaging, recovery and recycling initiatives.