Augean possesses deep expertise in understanding the chemical and physical interactions of waste materials, enabling us to apply the Waste Hierarchy effectively – prioritising re-use, recycling, recovery, and responsible disposal. Our approach aligns fully with the principles outlined in the Waste Framework Directive and is recognised as Best Available Techniques (BAT) in the Waste Treatment BREF, notably through the innovative use of one waste stream to treat another, exemplifying substitution principles. Our infrastructure is designed to maximise resource efficiency and minimise waste. By treating waste efficiently, we transform it into valuable resources that can be reused back into the industry, significantly reducing environmental impacts. This process is vital for sustainable waste management, helping to conserve finite resources and lower the negative effects of waste on the environment.

Optical brighteners for textiles. Applications include: • Treatment of synthetic fabrics • Chlorine-based bleaches • Coatings and varnishes • Laundry detergents and conditioners • Polystyrene and polyamide • Cellulose acetate • Plastic and Paper (DP389 & DP386 grades only)

The SpiraMAG Series transposes Faraday’s principles into a rugged, industrial package able to measure almost any conductive liquid. With an epoxy coated Steel or Stainless Steel body and IP67 enclosure rating, 2 liner and 2 electrode material options, thick or thin, clean or dirty, it can be measured. Whether it is clean water, industrial effluent, slurries, acids or bases there is a material combination to suit. Measuring range: 0.03 to 10 m/s Connections: DN10 to DN1000, DIN or ANSI Flanges (other flange styles on request) Linearity: better than ±0.25% of reading Minimum conductivity: down to 5µs/cm Pressure rating: up to 40 bar (100 Bar on request) Temperature rating: up to 150ºC Materials: Liners of, Soft Rubber or PTFE Materials: Electrodes of, Stainless Steel or Hastelloy C Versions: Compact or remote mount electronics Supply Voltage: 110/240 Vac or 24 Vac/dc Ingress protection: IP67 Display: flow rate & total Outputs: 4-20 mA (with HART), pulse, Modbus RS485/M-Bus

CANTY Spray Dryer Monitoring Systems are vision based, industrial camera/light combinations used to view spray nozzle patterns in real time. This allows operators to see changes in the profile of the spray pattern, and detect clogging/bearding before it becomes a problem. Operators can easily view for product build-up before there is a chance for fire.

FT Gas Control offers a range of bespoke safety spray shields, which are made to suit client application. Designed and developed to contain and detect hazardous spray-out, the shields are deployed to protect equipment and personnel should a leak or spray-out of acids, chlorine, caustics, chlorine and/or other dangerous liquids occur at piping connections. Also known as flange guards, the spray shields are available for all ANSI, DIN, PN, BS flange sizes and produced from polyethylene, polypropylene, PTFE, PVC and stainless steel. Manufactured from single and multi-layered clear cloth for easy visibility, PTFE safety shields can also be made from or a coloured cloth with a pH leak-indicating patch. This version features weep holes that allow the patch to not only immediately highlight a leak but also change colour, to green in the presence of an alkali or red if an acid; the safety shield may be reused via simply replacing the pH patch. Shields are appropriate for indoor or outdoor use and are resistant to sun, rain, and fumes and UV stable. Fire and tear resistant with a broad range of chemical resistance, FT Gas Control’s cloth shields are quick and straightforward for one person to install via their Velcro fasteners and drawstrings. Expansion joint shields – manufactured only from single, clear, standard PTFE – also feature a pH leak-indicating patch to signal leaks and weep holes that allow that patch to change colour. Velcro fasteners and draw strings allow the expansion joint shields to be readily attached and allow for any joint movement without impacting effectiveness. These shields are available for and appropriate to all expansion joint styles and brands. Contact FT Gas Control Systems Ltd via enquiries@ftgascontrol.co.uk or 01543416024 for any further information concerning the ranges of spray shields or to discuss their deployment with regard to your particular need.

The VS series is a robust, single-stage liquid ring vacuum pump designed for high reliability and efficiency. Available in multiple configurations, it features standard IEC motors, corrosion-resistant materials, and optimized service liquid consumption—delivering vacuum levels down to 33 mbar and capacities up to 1600 m³/hr.

The SRA reverse acting rupture disk (bursting disk) covers the majority of rupture disk (bursting disk) applications. Designed to be used in the SR7A Holder.

The Scully single point over ll prevention controllers feature two-wire optic or thermistor sensing. They are mounted at a loading rack or ll station for connection to a single compartment tank vehicle. For additional static bond/ground proving options, the system works in conjunction with the Scully ST-47 Groundhog Self-Proving Earthing Veri cation System.

ST-47 Groundhog Vehicle Static Ground Proving Unit -Self-proving technology based on Scully’s original patented design -Can operate in conjunction with your Scully Overfill Prevention System (ST-35® or ST-15) or as an independent ground verification unit -Immediately shuts down the loading operation if proper static grounding is not detected

The Series 8265 WiFi access point facilitates wireless data transmission through WiFi in Zone 1. It allows the retrieval of data or control of processes using devices like smartphones, tablets, or notebooks. Installation is straightforward, and its robust enclosure ensures functionality across diverse temperatures and conditions. Key Features ATEX Zone 1 Access Point Project-​Specific ​Built-​In ​Components​ for​ Wi-​Fi​ or​ Other​ Wireless​ Technologies Robust Field Enclosure Suitable for Industrial Applications Easy Installation Wide Temperature Range

Manufactured in Manchester UK, Atom Scientific offers a comprehensive range of Special Stains and reagents for all disciplines of life sciences. All products are certified for diagnostic use under IVDR, and within the UK are IVDD registered. They retain their CE mark outside of UK under IVDR and hold the UKCA mark within the UK. These exacting quality standards to which Atom are one of the few UK manufacturers in full compliance means we can play a part in our laboratory customers’ own compliance with quality management systems, such as ISO15189 for quality and competence in medical laboratories. Since 2018, Atom have participated in the UK NEQAS CPT (Cellular Pathology Technique) scheme as an independent validation of our in-house lab testing results.

The approved "Standard Production Plant" (SPP) is the IKA solution for the production of emulsions and suspensions in many areas of application. Depending on its execution, the Standard Production Plant can be used for cosmetic creams and lotions, for mayonnaise or dressings in the food industry as well as for suspensions and emulsions in the chemical industry or for production of paints and lacquers. The SPP is an innovative and highly advanced, but cost effective mixing plant used for all standard process operations like mixing, stirring, homogenizing and dispersing. Due to its simple design, it allows easy operation and guarantees a constant mixing quality. Options like vacuum degassing, double jacket for heating or cooling and ports for the additive incorporation and sampling makes the SPP an ideal machine for the complete product manufacturing sequence.

We are a trusted supplier of high-quality standard thinners, supporting a wide range of industrial applications including chemical manufacturing, solvents and process industries. With strong sourcing partnerships and efficient logistics, we provide competitive pricing, consistent availability and flexible supply options.

Our UN Open Tops range from 14L through to 210L and are UN approved for either Solids or Liquids. These drums can be manufactured with either a plain internal finish or lacquered finish depending on the product being filled. We provide recommendations and samples for testing to make sure your products are compatible with our drums. Colour options are available. Please enquire for more information.

Fdl offer a wide range of Steel Drums