A 6 mm-thick, multi-layered, loose-lay vinyl tile with a PUR+ surface treatment. GTI Max Cleantech has welded joints, is designed for industrial applications and suitable for very high traffic areas. Its advanced design allows it to withstand the heaviest traffic. The design incorporates a backing layer and two glass fibre grids with a recycled interlayer for extreme dimensional stability against rolling loads. Densely pressed colour chips throughout the 2.0 mm-thick pure colour wear layer provide a high level of wear resistance. Features and benefits: Fast and easy installation. A highly durable PUR+ surface treatment for easy maintenance. Extremely hardwearing – triple pressed at over 3000T. Type binder content I. Slip resistant – R10. Reduced noise of foot and rolling traffic. 100% recyclable and contains up to 80% recycled content. Also available as the GTI Max Connect tile (with interlocking dovetail joints - 635 x 635 mm), specified separately.

Features: • Fully integrated boiler feed water controller o Walchem Intuition 9 • Colour touchscreen display and data logging • Preconfigured firmware to enable up to 4 Pyxis Lab® smart censors: o Dissolved oxygen (DO) – ST-774 o Sulphite (SO32-) – ST-525SS o Fluorescein (FL) – ST-525SS-T o Conductivity (TDS) – ST-724 • Pre-plumbed in full stainless steel ¼” tubing with compression fittings • Integrated digital sample flow meter and manual rotameter • Integrated ST-774 ultralow dissolved oxygen sensor with flow cell • Integrated stainless steel solenoid isolation valve for sample lockout on temperature alarm • 3 integrated ST-007 stainless steel inline tee assemblies for up to 3 more Pyxis sensors • Plug-n-play sensor installation with prewired pigtails for future sensor addition • Integrated sensor calibration and maintenance shelf for user convenience

Guardtech Cleanrooms are modular cleanroom design & build contamination control specialists. Part of the Guardtech Group, Guardtech Cleanrooms provide innovative standard and client-specific bespoke ISO 14644 modular cleanroom installations for a wide range of Life Sciences and High-Tech Engineering applications.

Guardtech offer a comprehensive range of laboratory furniture & equipment solutions that can be supplied directly to the client – or provided as part of a cleanroom installation project. Whether it’s devices for personnel or product protection or transfer hatches that can improve your material flow, Guardtech are well positioned to advise you on the best solution. The equipment range includes air showers, biosafety cabinets, laminar flow units, desiccators, fume cupboards, downflow booths, nitrogen generators, isolators, autoclaves, measuring equipment and much more. Our diverse selection of furniture includes Trespa stepover benches, workbenches and cabinets, stainless steel racking, trolleys, bins, lockers, sinks and garment storage solutions, as well as many other cleanroom grade accessories such as taps, coat hooks, dispensers and Dyson Airblade hand dryers.

The Solvent Industry Association publishes Guidance Notes relating to topics important to our members and solvents end-users. These are amended as legislation or new regulatory compliance guidance, changes. SIA's comprehensive Guidance Notes are available free of charge, and can be downloaded via the SIA website.

The Solvents Industry Association produces a range of guidance videos, which are all freely available to view on the SIA website. They are also available in European languages - French, German, Spanish, and Italian. Topics include: - Safe Handling of Solvents - Safe Loading and Transportation of Bulk Solvents by Road - So, You Think You Know About Solvents? - Solvents and IBCs - Solvents and Static Electricity - Solvents and the Safe Use of Gloves

EXCLUSIVE PACKAGE DISCOUNTS on the sophisticated data analyser Leonova Diamond® & Emerald, incorporating the world’s most efficient condition monitoring technologies.

Hansen MLDB series quick-release dry-break couplings are designed for those critical applications where minimum spillage is vital, especially with flammable, toxic or other dangerous fluids, fine chemicals and pharmaceuticals, as well as a wide range of industrial fluids such as water, oils, fuels, solvents, acids, etc. We can offer special versions of these coupling with Triclamp, S60x6 IBC or any other type of connection.

Being able to manage, maintain and inspect your assets in an efficient, concise and confident manner, ExTrace® is an invaluable asset management software tool for helping sites achieve and maintain legislative compliance with national and international standards, in accordance with Statutory Instruments, Laws and Regulations, such as DSEAR and ATEX. ExTrace® is an in house hazardous area asset management system developed by experienced hazardous area engineers. It gives duty holders and compliance teams clear, structured and auditable control of hazardous area assets across their full lifecycle. Whether managing a single installation or a multi site, multi country operation, ExTrace® scales to meet the need. Asset structures can reflect site layouts and organisational hierarchies, supporting consistent standards while accommodating local requirements. This makes ExTrace® particularly valuable for organisations seeking to standardise hazardous area management across their operations.

A well-organised LO/TO program that includes clearly labelled energy sources, easy-to-follow procedures, and readily accessible lockout tools can greatly speed up maintenance and servicing activities. Workers can avoid time-consuming tasks such as tracing pipelines and electrical circuits in order to verify the appropriate energy control points. As a result, maintenance work is completed more efficiently, downtime is reduced and machinery is kept running at peak performance levels. With a comprehensive range of standard parts to cover all aspects of a Lockout Tagout process, as well as customized software for procedure control and custom workboards to meet any requirement we are confident we can help you maintain safety and compliance at all times

Labelling is the cornerstone of GHS compliance. With an emphasis on consistency and comprehension of chemical labels, it is important to know what goes into a GHS compliant label for primary and secondary containers. There are six key GHS label elements, all of which are covered within the Brady range of GHS solutions to allow you to stay compliant and ensure safety levels are maintained at all times. Whether you are labelling small containers in the laboratory, or large drums in a warehouse, the Brady GHS software & printer range provides an in-house solution. Alternatively we can supply pre-printed GHS labels as required

1st Waste manages the complexities of hazardous waste disposal by providing fully compliant, secure collections for chemicals, aerosols, and other specialist materials. Expert team ensure your business meets all environmental regulations while protecting your site and staff through safe, reliable handling procedures.

We provide specialised hazardous waste management through our Tockwith facility, where expert chemists lead the precise identification and safe segregation of complex waste streams. Our triple ISO-certified approach prioritises the waste hierarchy to deliver sustainable, compliant recovery and disposal solutions that safeguard both your business and the environment.

We specialise in providing hazardous waste services including the safe removal, transportation, recycling, recovery, disposal, and secure destruction of various hazardous and problematic wastes, together with our mobile chemist services for the compliant listing and packing of your waste streams to meet your duty of care needs.

A Hazard Identification is a systematic and thorough method for ensuring that all significant hazards are considered and all potential accident triggering events are identified. The study identifies hazards from: Previous operational experience Effect of failure of equipment designed to protect, detect or mitigate hazards Human error