OQEMA is a global distributor and supplier of specialty chemicals serving the agrochemical market. Our portfolio includes adjuvants, emulsifiers, dispersants, specialty solvents, wetting and chelating agents that are widely applied in modern agrochemical formulations. We work with trusted partners and develop solutions that enhance crop protection, plant nutrition, and tank mix adjuvants. With our time-tested, high-quality components, we help ensure active ingredients can be formulated into stable, effective products that spread, adhere, wet, penetrate, and protect crops in the most efficient and sustainable way.

Book your FREE AI Visibility and Site Audit Report. Visit us to find out how your brand is performing across search and AI-generated answers. Request a free AI Visibility Report in advance and we'll walk you through it together on the day.

* Air blow gun valve made of brass material for long service life * Hanging feature provided for convenient storage * Attractive and lightweight design for comfortable hand operation * Ergonomic construction for easy and safe handling * Heavy-duty design suitable for rough and continuous use * Ideal for industrial cleaning and maintenance applications

There are many reasons for milling materials: to increase solubility speed, to combine materials into a fine milled product, to give good 'mouth feel' & taste impact. Air classifier mills can achieve particle size reduction down to 4 to 15 microns. This depends on the mill selection and the characteristics of the material to be milled. Spray dried powders mill finer than crystalline powders. There are principally two types of mill process: mechanical impact milling & air jet milling. In mechanical impact mills, milling is achieved by impact between a high speed rotor fitted with hammers or pins and a stationary grinding track. Contact components are stainless steel. Materials harder than Mohs 3.5 are unsuitable for processing on these mills. Air jet milling uses compressed gas to impact the particles against each other. The advantages are higher energy input thus potentially finer milling and milling of abrasive materials. The disadvantage is often very high energy input for the compressed gas. In both types of mill particle size is controlled using an internal rotating classifier. Cryogenic freezing of raw material can permit milling of tough materials which become brittle when frozen. Depending on the requirements of the process and product temperature, controlled milling is also possible with either cooling of the mill or with introduction of heat into the mill air stream. Some products are sensitive to air oxidation during milling. At Custom Powders Ltd it is possible to run air classifier mills under an inert nitrogen atmosphere. Throughput on these mills is highly dependent on the raw material properties and the final particle size required. With 35 years experience in air classifier milling we can usually make a reasonable estimate for a new product based on historical data. Custom Powders Ltd offer air classified milling in 4 production suites ranging from FSSC22000 food grade, industrial and even to medical grade plastics.

Air classifying is suitable for high volume processing where a single product cut is required, to remove oversize or fines, typically between 10 and 300 microns. It is therefore capable of a smaller particle size cut than sieving. The accuracy of cut achieved is very material dependent and requires extended development time. Material is air conveyed into the classifier. This process is best suited to free flowing powders but sometimes it can accommodate cohesive powders. The vigorous air conveying and classifier action makes this process less suitable for hygroscopic or friable materials. Once the material enters the classifier an adjustable but static baffle system combined with variable speed classifier wheel achieves the separation. Fine material passes out of the classifier with the air flow and is separated in a filter unit, from where it can be packed into big bags or sacks. Oversize drops out of the air flow in the classifier and is discharged via a rotary valve. Air classifying is commonly used in Protein Shifting where precise particle size control is essential to provide consistent high protein content in the fine fraction. Air classifying is offered from three process units with standards from industrial to FSSC22000 food grade.

Seamless air freight solutions backed by global expertise. Drawing on a vast global network of industry representatives and our team’s extensive experience, we provide seamless, secure and efficient air freight solutions that keep your business moving forward. We understand that timely delivery is critical to your operations, so we prioritise clear communication, proactive problem-solving, and flexible options tailored to your unique shipping requirements. Hazardous cargo undertaken Track and trace Customs brokerage Complete documentation processes High speed delivery Global reach

Empire Pumps’ extensive range of Air Operated Diaphragm Pumps commonly known as AOD or AODD Pumps, are specifically designed for durability, performance and reliability. The pumps robust construction gives the ability to transfer abrasive and highly viscous solutions, manufactured for use with many industries including chemical, pharmaceutical, wastewater, effluent treatment, metal finishing and many more. Our air driven pump range vary in size from ¼’’ to 3’’ achieving flow rate capabilities up to 1000 l/min, making them ideal for a variety of chemical transfer applications. Equipment materials of construction are available in polypropylene, PVDF, aluminium and stainless steel. Elastomer, diaphragm materials: Santoprene, Nitrile, EPDM, Viton and Teflon (PTFE). Our range of Air Operated Double Diaphragm Pumps offer technical benefits when considering the corrosive nature of the chemistries being transferred. The air valve and centre section of our pneumatic pump range is plastic opposed to aluminium. Non-metallic constructed parts are more corrosive resistant should chemicals reach the centre section of the pump. Furthermore, our pump design utilises bolts opposed to band clamps, ensuing more support to the full surface area of the diaphragms whilst the pump is in operation. The bolted design also provides easier maintenance on strip down and assembly of the pump. Our pump design offers a centre positioned inlet and outlet port, giving equal flow through each side of the pump. This design feature enables our pump range to achieve 15 to 20% increased flow rate for the equivalent pump size of an alternative manufacturer.

- Modular type for easy and fast maintenance -Suitable for wall mounting - Filter – Bronze filtering element – Separator and shield for efficient moisture separation – Press type manual drain for easy operation - Regulator – Diaphragm operated, relieving type – Pressure compensated by balanced poppet – Non raising ‘Press to lock’ adjusting knob for locking at any set pressure - Lubricator – Fog / Mist type Lubricator – Fine adjustment of lubrication – Lubrication proportional to flow - Good flow and regulating characteristics

- Modular type for easy and fast maintenance -Suitable for wall mounting -Filter – Bronze filtering element – Separator and shield for efficient moisture separation – Press type manual drain for easy operation - Regulator – Diaphragm operated, relieving type – Pressure compensated by balanced poppet – Non raising ‘Press to lock’ adjusting knob for locking at any set pressure - Lubricator – Fog / Mist type Lubricator – Fine adjustment of lubrication – Lubrication proportional to flow - Good flow and regulating characteristics

The Airius wireless vibration sensor provides warning of vibration-related problems as well as gear and bearing faults. Designed for remote condition monitoring of standard production equipment, the sensor is ideal anywhere the wireless transfer of vibration data is practical, or even a matter of safety. Designed and manufactured by SPM Instrument, the sensor builds on fifty years of experience in developing reliable and industry-leading condition monitoring solutions. Connectivity made easy With the Airius sensors, online condition monitoring is uncomplicated. The cloud-based application Condmaster.NET, providing easy access to measurement data through a user-friendly graphical interface, is a convenient starting point. When the time is right, level

Alchemite™ is a suite of easy-to-use apps, each focused on a key challenge for scientists, experimentalists, data scientists, or managers. Give the right app to the right team member, speeding and informing their work. Then share results and collaborate across your team, creating an integrated machine learning solution for your R&D organisation.

The Rudolph Research Analytical AlcoTest is a highly versatile % ABV analyser for determination of alcohol content. Superior to ABV test strips and hydrometers, it allows distillers to maintain product consistency. The analyser provides a quick test for alcohol content supplying an accurate measurement in 3 minutes without the need for distillation. It combines a reference density meter and refractometer ensures highly accurate results, long term stability, reliability and low service costs. The AlcoTest ABV analyser offers quick and accurate ABV measurements that are easy to perform due to the simple direct syringe injection port. Just degas the sample, inject and press measure. The sample is automatically pumped through the instrument ensuring repeatable results every time with a very low cost of ownership. The AlcoTest alcohol analyser also allows you to measure key flavour quality indicators such as density, refractive index and Brix in a range of drinks from ready to drink cocktails, to flavoured gins and liqueurs, whisky and vodka.