Transvac manufactures a comprehensive range of Air Ejectors also known as Air Jet Ejectors, Athmospheric Air Ejectors and Air Eductors. Air Ejectors are used to extend the operating range of Liquid Ring Vacuum Pumps, boosting performance. The inlet pressure of a Liquid Ring Pump is limited to approximately 30 mbar abs because of the vapour pressure of its seal liquid (usually water). The addition of an Atmospheric Air Jet Ejector enables the Liquid Ring Vacuum Pump to operate outside its cavitation range allowing operation down to nearly 4 mbar abs.

Analytik Jena have been designing and manufacturing AAS instruments for over fifty years, and their current range incorporates traditional hollow-cathode lamp AAS’s as well as the unique ContrAA. This AA uses a continuum source that allows analysis of F, Cl, Br and I, is far faster than an HCL AAS and has much lower detection limits. We offer flame, furnace and hydride techniques with a range of unique technologies including direct-solid analysis, an enhanced working dynamic range and 3D-spectral and background correction. Full installation, training, method development and service contracts are provided by SciMed.

Atplus DRT-EPS is a tank mix adjuvant that combines adjuvancy properties, spray quality and drift control into one convenient product. It readily disperses in a tank mix meaning that no additional products are required. By controlling spray quality and reducing droplets that are prone to drift means that there is less wastage of products and less potential to damage neighbouring surroundings and habitats

Our UK laboratory generates auto ignition temperature test data for your flammable & explosible liquids, gases, and vapours. The auto-ignition temperature (AIT) test is conducted to determine the lowest temperature at which a substance will produce hot-flame ignition in the air at a specific atmospheric pressure, without the aid of an external energy or ignition source such as a spark or flame. It is also called ‘spontaneous ignition temperature’.

Autoclave High Temperature Process System PTSC, alongside Thermal Fluid Systems, delivers advanced thermal process solutions designed to meet the demands of high-performance industrial manufacturing. This project highlights the successful design and implementation of a high-temperature thermal fluid heat-transfer system supporting a new high-volume process autoclave installation, completed in August 2025. Together, the companies provided full design, supply, and commissioning of a system capable of delivering 1.7 MW of thermal energy, enabling precise thermal control within one of the world’s largest high-pressure autoclave environments. Developed to support the production of engineered polymer foams, the solution demonstrates expertise in complex thermal modelling, system integration, and international engineering compliance. Delivered within an accelerated 18-month programme, the project required adaptation of European standards to meet US codes and legislation, including ASME and UL requirements, while maintaining high levels of performance and reliability. The final system operates up to 300 °C and 10 barg, showcasing PTSC and Thermal Fluid Systems’ capability to execute challenging global projects from concept through to commissioning.

Sugar beet and cane mills often need to make multiple analyses from a single sample while reducing bench chemist involvement. Sugar testing lab automation allows chemists to reduce human error in the labs while increasing throughput and repeatability. Companies like Tate & Lyle and Minn-Dak Farmers use the Autoflex R817 to withstand their high sample throughput and multiple parameter testing. These robust systems make for excellent sugar lab automation systems due to their speed and low sample volume consumption. More applications of this automation system include automated abv measurements, automated petroleum testing, pure ethanol automated testing, and more.

The AutoFlex R827 automation system is available in both drawer and carousel configurations, based on a laboratory’s needs. The carousel configuration is geared towards lab automation as it can produce automated RI measurements with ease. Labs benefit from automated sample loading and cleaning whilst still using only 2 ml of sample. The two-sample drawer automation system with a polarimeter is perfect for the pharmaceutical industry as it allows users to measure their blank and sample in one rotation. The instrument always ends with a cleaning cycle so it’s always left ready to use for the next person. This automation system is also beneficial to quality control in the food and beverage industry where there are stricter requirements for products destined for human consumption.

Many flavour and fragrance labs need to make multiple tests of their sample such as automated density, specific gravity, refractive index, optical rotation, specific rotation, brix, colour and pH measurements all with one sample loading. Automated testing can be challenging as samples are scarce or very valuable and using the minimum amount of samples is important. Samples may be very viscous and require several solvents to fully clean the instrument. The Autoflex R837 can handle all of these requirements, using both suction and pressure at the same time makes pumping high viscosity samples of up to 37,000 mPa is possible through instruments still using less than 12 ml of sample

Autoload is a registered trade mark to describe a true innovation in loading technology. Autoload will remove the need for an operator to touch or guide the loading arm. It will seek the manhole on the tanker, insert, carry out safety checks and load automatically. On completion the arm will automatically return to its parking position.

RFID automates and streamlines processes, reducing errors and saving valuable time. Locate, track, and manage multiple assets at once, without needing line of sight Guide employees efficiently to the right assets, reducing search time Automate inventory audits with just a few clicks Ensure shipment accuracy by instantly verifying outgoing cargo Improve security and loss prevention with precise tracking Compliance: Meeting Industry Standards Our RFID solutions comply with global standards for seamless integration and reliability.

This automatic bottle filling machine is the best solution for compact, versatile and multitasks application with a maximum of 1,080 containers per hour. Here at PACK’R, we assist small and large manufacturers around the world with our PULSA-S step-by-step filler capper equipment for their liquid products. Our equipment is designed to increase the speed and efficiency of operations while effortlessly integrating with existing production equipment for optimal operations. The PULSA-S is a high-performance automatic bottle filling machine with capping system designed for a wide range of liquid products, whether foamy, viscous, or pasty. Engineered for flexibility, it handles a variety of container types including bottles and jerrycans making it ideal for multiple industries

GloveXpert performs reliable and repeatable leak tests using the positive pressure decay method, accurately assessing the integrity of both gloves and glove ports. Seamlessly integrating with RFID systems, it provides comprehensive test traceability. GloveXpert simplifies data management and, thanks to the integrated WI-FI, enables smooth communication with existing infrastructure, such as SCADA systems or others. GloveXpert ensures full compliance with: • FDA 21 CFR part 11 • EU Annex 11 • GAMP 5 • Guidelines and Annex 1 of the GMP • ISO 14644-7 Annex E.5 Key Benefits: • 1st to check 100% of the glove and glove port • NO calibration required • NO risk of false positives or negatives • Test time: 4–9 minutes• 120 test cycles on a single charge. • Full recharge in just 4 hours • Detects holes as small as 100 microns GloveXpert is the new patented wireless glove leak tester from FPS Pharma, designed to eliminate the risk of false positives and false negatives when testing glove integrity. Engineered to meet the stringent requirements of pharmaceutical environments, including aseptic and toxic processing, it ensures full compliance with industry regulations and guidelines while delivering exceptional ease of use and precision. This innovative glove integrity tester for isolators and RABS requires NO operator calibration, thanks to advanced pressure sensors, and features an integrated RFID reader for enhanced functionality. Unique benefits: 1 – Faster and Safer 2 – Lighter and Sturdier 3 – High-Tech and User-Friendly

Fully automatic pallet drums and totes filler engineered for precision, safety, and productivity. Designed to fill drums and IBC totes from 5 gallons to 330 gallons, the INLEO-P handles various products with ease including hazardous or food-grade liquids. This linear robotic filler automates the full cycle: detection, debunging, filling, capping, and sealing, without operator intervention.