For the safe storage and dispensing of chemicals. Optimize space usage in your factory with this stackable system. These containment bunds with optimal volumes guarantee careful leak control in the event of faults. The process and dosage pump can be installed into the system structure.

Liquid Handling Instruments and consumables from major manufacturers of Liquid Handling equipment • Hamilton - Microlab ML600 semi-automatic dispenser and diluters. Syringes and needles for all applications. • Hirschmann - Bottletop dispensers and titrators. Electronic and manual pipettors. • Vistalab - Ovation Bio-Natural ergonomically efficient single and multi-channel pipettors from 0.2uL to 1250uL. • SGE - GC Autosampler Syringes , HPLC Autosampler Syringes, Manual Syringes, Diluter/Dispenser Syringes, Replacement CTC PAL-XT Syringes and eVol® hand-held automated analytical syringes. • Sartorius - Tacta manual and Picus electronic single and multi-channel pipettes.

Dabico Airport Solutions is a leading Aviation and Process infrastructure solutions company with over 50 years of experience. The company specialises in designing, manufacturing, and delivering high-quality turnkey solutions that aim to make airports, liquid storage facilities, and process plants worldwide more efficient and environmentally friendly. We manufacture liquid handling equipment suitable for marine, road, and rail tanker liquid handling. Dabico’s equipment solutions includes loading arms for road and rail tankers, marine loading systems, folding stairs for loading bays, packaged skid systems, tank sampling systems, and floating suctions for vertical/horizontal storage tanks. Dabico manufactures in our Stockton-on-Tees production facility and is ISO certified to 9001, 14001, and 45001.

Liquid ring vacuum pumps are available in a wide range of metallurgies and sealing options to suit specific applications, including use in hazardous flammable and explosive areas. Their versatility and reliability means they are widely used in facilities of all sizes and across many industries. Available as single- or two-stage liquid ring units, these pumps can handle high volumes of vapours, condensable gases and liquids without compromising performance or mechanical reliability. The service liquid – water or other liquids, oils or solvents – can be selected to suit almost any application. When clean water is used, the aspirated air is ‘washed’ free of contaminants such as oil, carbon or plastics. Liquid ring vacuum pumps are designed for simplicity and reliability. Fewer components simplifies maintenance, while minimal moving parts eliminate metal-to-metal contact, significantly reducing vibration, noise and wear. Key features: • Duties up to 3500 m3/h • Max vacuum: 33mbar • Single or double mechanical seal (DIN 24960 standard) • Designed and manufactured to ISO 9001 standards • Close-coupled and long-coupled options with open impeller • Can handle gases and vapours • Fewer components for improved rigidity and easier maintenance • Compact dimensions with reduced shaft length minimising deflection and vibration • Simple design with no valves or sliding vanes • Impeller is the only rotating part – no metal-to-metal contact, reducing wear and tear • ATEX certification available on request Materials of construction: • Cast iron, AISI 316, Ni-Resist D2B, Hastelloy B, Hastelloy C, Uranus B6 and exotic alloys. Liquid Ring Vacuum Systems: We also offer complete vacuum systems comprising of a liquid ring pump, air-liquid cyclone separator and a heat exchanger mounted on a compact skid.

The LiquiSonic® Measurement System utilizes sonic velocity to measure the concentration of process liquids during the incoming goods control. The sensor can be installed directly in the delivery pipeline. By connecting the immersion sensor to the control system via BUS interface or digital output, LiquiSonic® can directly control the valves and ensure the safety of the entire process.

The Wolf ATEX LED Installed Linear lighting range is available with either FFA (Forward Facing Array) LED modules or our own revolutionary, patented DLO (Directional Linear Optics) modules. Both versions have Emergency models with backup battery power supply, and are available in the standard industry sizes - 2 feet and 4 feet.

Our LOPA studies give you the data you need to justify safety investments to management. We can achieve this by focusing resources where they'll have the greatest impact, and demonstrating to regulators that you've taken a rigorous, quantitative approach to managing your major accident hazards.

LOTUS chlorine dioxide generators are the most effective solution for water disinfection in a variety of applications and in particular for the prevention of legionellosis in domestic hot and cold water systems. The bacterium that causes legionellosis, Legionella, is able to adapt even to conditions that would be fatal to other organisms. Thanks to its high Redox potential, chlorine dioxide exerts a more powerful disinfectant action than other biocides against Legionella and all kinds of germs and contaminants such as viruses, bacteria, fungi and algae. The oxidation potential is higher than that of chlorine, for example, so fewer chemicals can be used. Potentially dangerous disinfection by-products are absent and it is proven to penetrate and degrade the Legionella habitat. The action of the chlorine dioxide is independent of the pH value of the water, is not aggressive towards pipes and has a longer-lasting and wider-ranging effect from the injection point. Scientific tests have shown the effectiveness of the disinfectant action, with almost 100% killing of Legionella in just 30 minutes and elimination of the proliferation habitat. Safety is ensured by the atmospheric pressure production process, in which chlorine dioxide is never treated in its gaseous form but is produced by reacting two liquid precursors in a reaction chamber in only the amount needed at the time.

Discover our range of Lubricants and Metal Working

LUXOR believe that innovation and smart design thinking should be accessible for every user. That is why they build a series of highly advanced, fully automated metal coaters meant for high-resolution imaging and microanalysis. Customers can therefore expect faultless, uninterrupted operation as well as fast and consistent results. LUXOR Carbon Coater Precision Carbon Coating for Superior SEM Analysis. Trusted by leading industrial and academic SEM labs, LUXOR sputter coaters are the go-to solution where image quality and high-resolution imaging are critical. The LUXOR Carbon Coater is a state-of-the-art, fully automated system designed to deposit a thin, uniform layer of carbon on SEM samples—effectively eliminating charging issues during EDX/EDS chemical analysis. Renowned for its user-friendly interface, innovative upside-down design, and rapid, hassle-free operation, the LUXOR simplifies your workflow while consistently delivering high-quality results. LUXOR Gold Coater The LUXOR Gold Coater is an advanced, fully automated sputtering device that applies a fine grain gold coating from 1 to 100 nm thickness. This allows you to get the very best SEM imaging quality from your samples. LUXOR’s unique A² technology generates a gold plasma and sprays it in a controlled and accurate manner, resulting in an extremely uniform, thin and homogeneous gold layer. The LUXOR Gold Coater is also renowned for its ease of use and quick, hassle-free operation. LUXOR Platinum Coater The LUXOR Platinum Coater is a highly innovative, fully automated sputtering device which applies a fine grain platinum or gold coating from 1 to 100 nm thickness. LUXOR’s unique A² technology assures that the gold or platinum is sprayed in a highly controlled and precise manner, resulting in an extremely uniform, thin and homogeneous coating. This allows your scanning electron microscope to show the best possible image quality.

With LX610e printing and precise die-cutting are incorporated into one easy, timesaving step. Just import your design into the included software and create an individual contour cut or select one of the many standard die-cuts such as squares, circles, stars or rectangles. LX610e produces gorgeous, professional-quality labels with colour inkjet printing at up to 4800 dpi. With LX610e you can choose from a wide variety of substrates, including DTM White Gloss Polyester, DTM Clear Gloss Polyester and DTM White Gloss Paper. Additional materials from the DTM Genuine Label Stock are available if using pre-die cut stock.

ESSLAB offers a wide range of vials, caps and accessories for chromatography. Designed for all popular instrument manufacturers, including Waters, Agilent and Shimadzu, the ESSLAB range is complemented by a wide range of accessories, including storage solutions as well as crimpers and decappers.

Elevate your water and wastewater analysis with the cutting-edge NANOCOLOR® VIS II. This high-precision spectrophotometer combines premium high-tech components with outstanding usability, revolutionizing daily laboratory work.