Our monostable NAMUR solenoid valves are suitable for direct assembly to your pneumatic rotary actuator. Thanks to its practical reverse sealing, you will get 3/2 as well as 5/2 way function combined in one solenoid valve, a feature that will make the storing also easy. This way, you can regulate not only spring return but also double acting pneumatic actuators with the same solenoid valve. Check the link for other options.

The CHEMQUIP MNK-X/XB & SCK-X - VORTEX design Conveyance of solids-containing and gas-laden media. Vortex pumps are preferably used for media with a heavier solids content. In addition, they have relatively good gas/liquid pumping capabilities. Features Media with !Solids contents of up to roughly 50% by volume, depending on grain size and properties. !Particle sizes of about 1 to 2 mm, depending on the pump size. !Long-fibre constituents !Gas contents of up to 5% by volume are conveyed gently for pump and medium. Reliable magnetic drive or mechanical seal versions. Gentle conveyance of media with fibrous or crystalline constituents. Vortex pumps as mixers, due to the strong circulation currents, the liquids to be conveyed are intimately mixed inside the pump and then discharged. Thus a mixer may be dispensed with. Favourable cavitation behaviour, although cavitation occurs somewhat earlier than in a standard centrifugal pump, the cavitation curves become much flatter. The pump therefore maintains delivery at a slightly reduced head for longer than a comparable standard centrifugal pump. No cavitation damage is to be expected as cavitation occurs in the liquid-filled free space of the housing. Solids-containing media The large free space in the housing and the semiopen radial bladed impeller with the star-shaped vanes are the decisive factors for these conveying properties. Vortex pumps do not show any tendency to clog or experience increased wear. If the solids content >2% by volume, flushing of the can chamber must be considered for magdrive pumps using a special plain bearing with filtered pump liquid or external flushing medium. Gas-laden media Standard centrifugal pumps can convey liquids with a gas content of up to 3% by volume, above which delivery fails and is not resumed without the pump being shutdown. By contrast the Chemquip vortex pumps can handle process fluids with gas contents of up to 5% by volume (at a minimum flow rate of about 20% Q ). optimum

We constantly work to improve efficiencies and reduce costs through vendor reduction and customised distribution. Vendor consolidation or vendor reduction, is a well-known means of simplifying, reducing costs and increasing efficiencies in raw material procurement. Having just one contact for tail end, or all, of a company’s raw material needs dramatically simplifies and positively transforms raw material supply. Once a company has shown interest in implementation of vendor consolidation, a discussion with Camida can ensue. Camida will endeavour to answer positively to all aspects of concern to the customer during the process. This can involve many criteria and may include: Stable pricing Credit terms Consignment stock Customer defined intranet portal. A specific package of services can be defined to suit the customer. Hence, we call Camida’s programme of vendor reduction.

SOLVENTS: VIRGIN-QUALITY MATERIALS FOR CIRCULAR SUPPLY When your processes depend on premium solvents, continuity and compliance are non‑negotiable. Indaver Solvents turns spent, complex solvent streams into virgin‑quality material — securely, consistently, and at scale — so you can reduce procurement risk, cut lifecycle costs, and hit your circularity targets without compromising quality. Using advanced separation technologies — tailored distillation and rectification trains, dehydration and selective fractionation — we recover up to 95% of used solvent content from many industrial streams and refine to +99% purity, meeting stringent specs for fine chemical, pharma and micro‑electronics applications. That’s how we keep critical molecules in circulation and your lines running. Our approach is built for performance and traceability. From incoming characterization to recipe‑driven purification and release, every batch follows documented, auditable steps aligned with customer and regulatory requirements. The outcome is high‑grade, reuse‑ready solvents that deliver the performance of newly produced product while lowering embedded CO₂ and reducing reliance on volatile virgin markets. It’s a practical route to Scope 3 improvement and secure supply. What sets Indaver apart is our industrial integration and investment roadmap. Across our European footprint, we’re expanding dedicated and multipurpose assets that underpin reliable capacity for solvent material recycling — giving manufacturers the confidence to plan circular sourcing long‑term. If your streams are mixed or variable, our teams assess feasibility rapidly and design the optimal recovery route with clear acceptance criteria and KPIs. Bring us your challenge; we’ll bring you a circular, compliant solvent that behaves like new - only smarter.

Orcas is a portable ultrasonic flowmeter designed for speed and ease of use. With the Orcas, you can capture accurate and reliable flow measurements in under one minute — saving you time and money. There are no wires and no bulky electronics to haul around. Your mobile device connects wirelessly to display measurements. And, the ultrasonic flowmeter installs on the outside of your pipe. With Orcas Flowmeter and the Orcas App, you’ll get your job done more quickly every time. Advantages & Features Install and measure flow in under one minute Long battery life, lasting up to 24 hours SoundWater Reciprocity Architecture Internal data logger Measure flow rate, totalizer & velocity Auto-Adjusting Ultrasonic Power Mobile App for fast, intuitive setup and use One-piece construction; no assembly Integrated cam-cleats that instantly snap on/off the pipe Wireless design Compact size for carry-on/travel Gel-free transducers (optional) Battery powered & portable

We pride ourselves in our problem solving capabilities and our ability to source materials from all over the world, from a diverse range of excellent suppliers. Our sourcing team consists of technical sourcing specialists answering over 3,000 enquiries annually across our three core business units of Life Sciences, Industrial, and Ingredients. With over 35 years of experience in the industry, we have built a huge knowledge base and gained wide expertise in the sourcing of chemical products that successfully enables us to help our customers solve various procurement challenges. Coming up with innovative solutions and providing strong technical support to our customers has contributed to us becoming an industry leader in the field of sourcing.

SP20 AD Systems Smoke Point Tester Overview The SP20 is a fully automated smoke point analyser for kerosene and aviation turbine fuels. It uses digital imaging to detect flame shape and height objectively, improving repeatability and removing operator subjectivity for dependable QC and specification testing. Standards • Conforms to ASTM D1322, IP 598, ASTM D1655 and DEF STAN 91-91 • Recognised as the referee approach for jet fuel specifications Key features • Automated flame height detection via video camera with precise image analysis • Embedded temperature, pressure and humidity sensors with automatic atmospheric compensation • Performs multiple determinations and reports the average for traceable results • Internal database with print, USB export and LIMS connectivity • Quick setup with guided workflow and safety improvements over manual observation Performance and benefits • Objective, repeatable measurements with improved precision versus manual methods • Unattended operation reduces labour time and frees staff for other tasks • Short test time supports high throughput in busy QC labs Typical applications • Jet fuel and kerosene smoke point determination for batch release and incoming goods • Refinery, terminal and airport fuel farm quality control • R&D, specification compliance and method correlation What is included • SP20 instrument with touchscreen interface, onboard sensors and data management • Accessories and sample handling options available to suit your workflow Summary SP20 delivers accurate, traceable smoke point results with integrated atmospheric compensation and automated imaging. It helps aviation fuel labs meet international standards while boosting safety, throughput and consistency.

A range of Pumps specifically designed for High Viscosity Applications such as Oils, Polymers, Food Stuffs etc A robust high performance general purpose dosing pump range that is a direct drop in replacement for many existing installations. Manufactured from Martensitic Stainless Steel for extremely good wear resistance and extended life time, special material combinations are available for corrosive or abrasive applications. High Precision Repeatability Relatively high pressure capability Lip seal as standard with other options available Complete solution avaiable with standard or ATEX drive Reliability Fast delivery times (depending on order quantity)

CXControls provides specialist engineering resources and subject matter experts to support regulated and safety-critical projects across the full lifecycle. From functional safety and ATEX compliance to commissioning and project leadership, we deliver flexible access to experienced professionals where specialist capability is required. Services: * Specialist engineers * Subject matter experts * Project Management * Technical trade resourcing

Our Specialist Industrial Services team offers a vast range of expertise from tank to bund cleaning and decommissioning, as well as the cleaning of: + Anaerobic digestors + Storage tanks + Blue water facilities + Chemical / acid / glycol tanks + Grease tanks + Bitumen tanks + Sludge tanks and DAF plants + Fuel and effluent tanks

Augean possesses deep expertise in understanding the chemical and physical interactions of waste materials, enabling us to apply the Waste Hierarchy effectively – prioritising re-use, recycling, recovery, and responsible disposal. Our approach aligns fully with the principles outlined in the Waste Framework Directive and is recognised as Best Available Techniques (BAT) in the Waste Treatment BREF, notably through the innovative use of one waste stream to treat another, exemplifying substitution principles. Our infrastructure is designed to maximise resource efficiency and minimise waste. By treating waste efficiently, we transform it into valuable resources that can be reused back into the industry, significantly reducing environmental impacts. This process is vital for sustainable waste management, helping to conserve finite resources and lower the negative effects of waste on the environment.

Boud Minerals offer a range high quality silica sands that are washed, dried, and processed to meet continental grade specifications. As well as sands, Boud boast a large portfolio of specialist aggregates for a range of end applications.

Optical brighteners for textiles. Applications include: • Treatment of synthetic fabrics • Chlorine-based bleaches • Coatings and varnishes • Laundry detergents and conditioners • Polystyrene and polyamide • Cellulose acetate • Plastic and Paper (DP389 & DP386 grades only)

The ProMill-8 jet mill is designed for production needs. The typical batch sizes is between 2kg and 10,000kg. It’s available in two configurations, cosmetic/chemical and pharmaceutical, to better-fit different requirements. At FPS R&D and test center it’s possible to perform technical trials with products on ProMills. ProMill-8 unit is available in: - ATEX configuration - with PLC control system - with interchangeable inserts (AISI316L, HC-22, PTFE, HDPE or ceramic) - WIP /CIP The ProMill series is engineered to encounter the request from production facilities, where large volumes are processed in a flexible and efficient operation. The ProMill series belongs to a jet mill family which is the result of an unparalleled optimization study. This optimization brings FPS Jet mill to low process gas consumption, to process performances and yields, quick product change operations. KEY ADVANTAGES: • Custom-designed to ensure perfect integration into your installation room. • Quick product changeover and cleaning: easy assembly/disassembly minimizes downtime and cleaning time. • Efficient and continuous production to hit your annual KPIs. Contact us to request the new brochure: sales@fps-pharma.com

The SpiraMAG Series transposes Faraday’s principles into a rugged, industrial package able to measure almost any conductive liquid. With an epoxy coated Steel or Stainless Steel body and IP67 enclosure rating, 2 liner and 2 electrode material options, thick or thin, clean or dirty, it can be measured. Whether it is clean water, industrial effluent, slurries, acids or bases there is a material combination to suit. Measuring range: 0.03 to 10 m/s Connections: DN10 to DN1000, DIN or ANSI Flanges (other flange styles on request) Linearity: better than ±0.25% of reading Minimum conductivity: down to 5µs/cm Pressure rating: up to 40 bar (100 Bar on request) Temperature rating: up to 150ºC Materials: Liners of, Soft Rubber or PTFE Materials: Electrodes of, Stainless Steel or Hastelloy C Versions: Compact or remote mount electronics Supply Voltage: 110/240 Vac or 24 Vac/dc Ingress protection: IP67 Display: flow rate & total Outputs: 4-20 mA (with HART), pulse, Modbus RS485/M-Bus