Control Dangerous Chemical Spray-Outs at the Source The APS Splash Arrestor® is engineered to capture and redirect high-pressure chemical spray-outs, protecting personnel and equipment from hazardous exposure. Its stainless steel mesh design safely disperses leaks downward—delivering reliable protection in demanding chemical processing environments. - Capture & Redirect Spray-Outs – Multi-layer stainless steel mesh controls and disperses hazardous leaks safely - Built for Extreme Conditions – Withstands up to 2000°F and 3500 PSI in corrosive chemical environments - Simple, Reliable Design – Quick-install latch, no maintenance required, and fully reusable over time

A range of Pumps specifically designed for Low Viscosity Applications such as Water, Solvents, Isocyanates etc. Unlike any other pumps available on the market the SPLV will accurately pump these fluids at pressures up to 50 bar. Our low viscosity metering pumps combine advanced materials that have been specifically chosen with food applications in mind and address the demands of more challenging environments. Pulsation Free High Precision Repeatability Relatively high pressure capability Magnetic Coupling as standard for zero leakage Complete Drive solutions available with standard or ATEX drive Metallic rather than plastic components for extended pump life Fast delivery times

FT Gas Control offers a range of bespoke safety spray shields, which are made to suit client application. Designed and developed to contain and detect hazardous spray-out, the shields are deployed to protect equipment and personnel should a leak or spray-out of acids, chlorine, caustics, chlorine and/or other dangerous liquids occur at piping connections. Also known as flange guards, the spray shields are available for all ANSI, DIN, PN, BS flange sizes and produced from polyethylene, polypropylene, PTFE, PVC and stainless steel. Manufactured from single and multi-layered clear cloth for easy visibility, PTFE safety shields can also be made from or a coloured cloth with a pH leak-indicating patch. This version features weep holes that allow the patch to not only immediately highlight a leak but also change colour, to green in the presence of an alkali or red if an acid; the safety shield may be reused via simply replacing the pH patch. Shields are appropriate for indoor or outdoor use and are resistant to sun, rain, and fumes and UV stable. Fire and tear resistant with a broad range of chemical resistance, FT Gas Control’s cloth shields are quick and straightforward for one person to install via their Velcro fasteners and drawstrings. Expansion joint shields – manufactured only from single, clear, standard PTFE – also feature a pH leak-indicating patch to signal leaks and weep holes that allow that patch to change colour. Velcro fasteners and draw strings allow the expansion joint shields to be readily attached and allow for any joint movement without impacting effectiveness. These shields are available for and appropriate to all expansion joint styles and brands. Contact FT Gas Control Systems Ltd via enquiries@ftgascontrol.co.uk or 01543416024 for any further information concerning the ranges of spray shields or to discuss their deployment with regard to your particular need.

The SRA reverse acting rupture disk (bursting disk) covers the majority of rupture disk (bursting disk) applications. Designed to be used in the SR7A Holder.

Sulphate Reducing Bacteria Test Kits | SRB Tests SKU: 10010357 For the semi quantitative detection of Sulphate Reducing Bacteria. Sulphate Reducing Bacteria (SRB) are microorganisms that have the ability to produce corrosive sulphide which can, in turn cause a variety of issues for many industrial sectors – such as the corrosion of ferrous and non-ferrous metals and masonry, discoloration of metal fluids and the production of foul-smelling gases. SRB Test Kits are fast, efficient, and easy to use for the detection of such microbial induced corrosion (MIC) caused by Sulphate Reducing Bacteria, with a large window of detection from bacterial concentrations as little as >10 SRB cfu/ml up to >10⁴ SRB cfu/ml. Results can be interpreted up to 6 days incubation, with high levels of contamination indicated in as little as 24 hours. Each of our semi quantitative SRB Test Kits comprises of x10 plastic tubes filled with selective culture media to encourage the growth of Sulphate Reducing Bacteria. All kits are packaged securely in fitted boxes with an easy-to-follow instruction leaflet, providing all the information required for testing. SRB Test Kits can be used to test a vast range of industrial samples including; Metal working fluids, Lubricants and oils, Water (tanks, environmental, process etc.), Fuel tank sediment, Corrosion pits/surfaces, soil, mud and core. For more information regarding our SRB test kits or for details on bulk order discounts, please feel free to contact us.

The Scully single point over ll prevention controllers feature two-wire optic or thermistor sensing. They are mounted at a loading rack or ll station for connection to a single compartment tank vehicle. For additional static bond/ground proving options, the system works in conjunction with the Scully ST-47 Groundhog Self-Proving Earthing Veri cation System.

ST-47 Groundhog Vehicle Static Ground Proving Unit -Self-proving technology based on Scully’s original patented design -Can operate in conjunction with your Scully Overfill Prevention System (ST-35® or ST-15) or as an independent ground verification unit -Immediately shuts down the loading operation if proper static grounding is not detected

Stainless steel filter housings are designed for use with industry-standard and high-flow filter cartridges, or filter bags, in a range of applications. Housings help to trap contaminants and particulates in fluids in industries such as chemical processing, pharmaceuticals, food and beverage, and industrial water treatment. Fileder’s range offer a variety of size, configuration and technical options to suit most commercial, industrial and sanitary applications. From 5” to 60” in size (including high-flow options), and holding 1 - 36 filter cartridges and offering technical choices such as:- material options, pressure and temperature ratings, lid configuration, o-ring material, port size options and cartridge end-cap compatibility. Brands available: SPECTRUM

The HOYER portfolio includes stainless steel IBC totes with capacities ranging from 500 to 1,100 liters. They are safer and more durable than plastic versions and are particularly suitable for use in the paint and coatings industry, but are also in demand for flammable liquids and aggressive media such as acids, alkalis, and flammable liquids. In addition, they are very easy to clean. This is a decisive advantage over plastic IBC totes for high-purity or reactive products, as even the smallest impurities can severely impair the quality of the products. Aseptic IBC totes are also part of the range, because unlike plastic IBCs, significantly higher temperatures can be used during cleaning.

Manufactured in Manchester UK, Atom Scientific offers a comprehensive range of Special Stains and reagents for all disciplines of life sciences. All products are certified for diagnostic use under IVDR, and within the UK are IVDD registered. They retain their CE mark outside of UK under IVDR and hold the UKCA mark within the UK. These exacting quality standards to which Atom are one of the few UK manufacturers in full compliance means we can play a part in our laboratory customers’ own compliance with quality management systems, such as ISO15189 for quality and competence in medical laboratories. Since 2018, Atom have participated in the UK NEQAS CPT (Cellular Pathology Technique) scheme as an independent validation of our in-house lab testing results.

We are a trusted supplier of high-quality standard thinners, supporting a wide range of industrial applications including chemical manufacturing, solvents and process industries. With strong sourcing partnerships and efficient logistics, we provide competitive pricing, consistent availability and flexible supply options.

Transvac Steam Ejectors; also known as Steam Jet Ejectors or Steam Eductors are used for creating vacuum across many industries. Applications range from coarse vacuum single stage Steam Ejectors; such as rapid evacuation Ejectors (also known as ‘Hoggers’) up to 5 stage Steam Jet Ejector Systems fully packaged to produce vacuum levels of up to 25 microns Hg abs. Modern, energy efficient Steam Jet Ejector Systems offer many advantages when compared with other vacuum producing systems, such as mechanical Liquid Ring Vacuum Pumps, Rotary Vane or Screw type Vacuum Pump. Steam Jet Ejectors can often utilise surplus motive steam sources on site and need no additional energy.

Transvac Steam Jet Thermocompressors are energy saving devices that compress low pressure steam, often waste steam, to a higher useable pressure.

Fdl offer a wide range of Steel Drums

We supply large, intermediate and small steel drums in both tight head and open head types. Drums are available internally plain or lacquer coated. Capacities from 5-litre 210-litre. We are specialists in supplying steel drums which are UN compliant for both solids and liquid applications.